2297862 PLATE-REINFORCEMENT Caterpillar parts
345C, 345D, 345D L, 349D, 349D L, 349E
Rating:
Alternative (cross code) number:
CA2297862
229-7862
2297862
CA2297862
229-7862
2297862
Weight: 115 pounds 52 kg.
EXCAVATOR,
Number on catalog scheme:
7
For full view, you need register
Information:
Illustration 2 g01397626
Loading the PCL File Using FTP with the Command Prompt
Perform the following with a DOS FTP session:
Illustration 3 g01176569
Illustration 4 g01176577
Start a DOS session.Note: This can be done on most versions of Microsoft Windows by clicking on "Start", then selecting "Run".
Illustration 5 g01397624
In the Run dialog, type "CMD" and click "OK".Note: If Microsoft Windows 95 or Microsoft Windows 98 are being used, then the word "command" must be used instead of "CMD".
At the DOS command prompt, type "ftp xxx.yyy.zzz.aaa".Note: "xxx.yyy.zzz.aaa" is the IPv4 address of the device. The address of the device is defined in the "Configuration" screen in Cat ET.
Illustration 6 g01402161
Press "Enter".Note: The screen will be similar to the screen in Illustration 6.
Illustration 7 g01402164
At the prompt, type in the user name.
Press "Enter".
At the password prompt, type in the password.Note: After entering the user name and password, the screen will be similar to the screen in Illustration 7.
Set the local directory and remote directory for proper transfer of the file.Note: In order to specify the local working directory, use the command lcd PL1000E. See Illustration 8.
Illustration 8 g01402167
Set the remote directory.Note: By default, when the user logs into FTP, the remote directory is /ram. Confirm that the remote directory is /ram by issuing a Print Working Directory (PWD) command. If the current working directory is not returned as "/ram/", then use a Change Directory (CD) command such as "ftp> cd /" in order to return to the root directory. See Illustration 9.
Illustration 9 g01402168
Since all new PCL files must be loaded into the "New" directory, change from the remote directory to the "New" directory using the "Change Directory New (CD New)" command.
Illustration 10 g01402169
In order to confirm the remote directory is set up correctly, use the PWD command again. The current remote directory should be returned as "/ram/New/". Refer to Illustration 11.
Type "Binary" and press "Enter". (This process forces DOS ftp to transfer file in binary format instead of the default ASCII.)
Illustration 11 g01402179
Move the PCL file to the ECM. Using the Put command, execute the FTP process as shown in Illustration 12 and Illustration 13, replacing "G3612_Engine.pcl" with the name of the PCL file.
Illustration 12 g01402180
After the file has been sent successfully, exit the FTP session using the Bye command. The FTP session will close, and the screen will return to a DOS command prompt.
Illustration 13 g01402183
Initiate configuration of the PL1000E Communication ECM with the new PCL file by either removing and reapplying power to the ECM or by executing the steps outlined in System Operations, RENR8091, "Parameter Translation Configuration".
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 5110B, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 83...
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 651E...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345B, 345B II,...
330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 797, W345B II, W345C MH
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 350, 568 FM LL, M330D, W345C MH
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
345C, 345C L, 345C MH, 345D L, 365B, 365B II, 365B L, 365C, 365C L, 385B, 385C, 385C L, PIN GRAB, W345C MH
2550456
PLATE-WEAR
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2297824
PLATE-WEAR
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2297823
PLATE-WEAR
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2297822
PLATE-WEAR
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2297821
PLATE-REINFORCEMENT
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2550458
PLATE-WEAR
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
336D, 345C, 345D, 345D L, 349D, 349D L, 349E
2392501
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E
2392500
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E
2297865
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E
2297864
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E
2297863
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E
2550459
PLATE-WEAR
345C, 345D, 345D L, 349D, 349D L, 349E
345C, 345D, 345D L, 349D, 349D L, 349E