PLATE-CORNER 2436140 - Caterpillar

Enter a Corporate Web Security (CWS) user name and password.
Illustration 41 g06214900
Home screen
Select the three-dot button to the right of the desired machine name.Note: Machines that have already made a Bluetooth connection with a key fob or mobile device will not show in the list.
Illustration 42 g06214904
Connection menu
Press "Connect" to log in to the machine. A link symbol will appear below the three-dot button to indicate a successful connection. Check the in-cab display to ensure that the device was recognized. The "Operator Information" screen should be displayed.
Illustration 43 g06214908
Details screen when linked to a machine
Select the three-dot button on the mobile application and press "Details". When the machine is connected, there is an indication in the upper right indicating the machine-to-mobile Bluetooth status.Note: If there is a connection failure, a dialog will appear to alert the mobile user. Refer to Illustration 44. Ensure that Bluetooth settings are ON and retry establishing a connection. If Bluetooth is ON and connection cannot be achieved, the application might not be registered with the machine. Refer to the Testing and Adjusting, "Key - Program" or contact your Cat dealer.
Illustration 44 g06214907
Connection failure dialog
Illustration 45 g06224324
Press the "OK" button to access the main screen on the monitor.
Illustration 46 g06209482
After an operator logs in to the system successfully, an "Engine Start Allowed" message will appear across the top of the monitor. Refer to Operation and Maintenance Manual, Engine Starting for instructions on starting the engine.Mobile Application Logout (iOS devices)
If the operator connects to the wrong machine or wants to log out of the machine using the mobile application, refer to the following steps:
Illustration 47 g06214908
Details screen when linked to a machine
Navigate to the "Details" screen of the connected machine.
Illustration 48 g06214911
Machine details page
Select the "Disconnect" button. The screen will refresh and the link symbol will disappear indicating that the operator has logged out.Alternatively, the user can disconnect from a machine from the home screen. When selecting the three-dot button next to the connected machine, press "Disconnect" to log out.Engine Start Switch Troubleshooting
Table 2
Switch Status Possible Cause Resolution
Engine startswitch is not illuminated Engine start accessory power not on Turn engine start switch ring to ON position
Power management triggered Cycle engine start switch ring and try to restart
Engine start switch is green Starting component failure Contact your Cat dealer
Engine start switch is red Machine interlock conditions not met Hydraulic lock in LOCKED position
Engine shut down without cycling start switch ring Cycle engine start switch ring and try restart
Operator not authenticated (Passcode login) Add operator to machine authorized user list
Switch operator from guest mode using display
Operator not authenticated (Bluetooth key) Add operator to machine authorized user list
Replace key fob battery
Ensure more than 4.5 m (15 ft) from other Bluetooth equipped machine
Alternately login with display passcode or contact local Cat dealer
Operator not authenticated (myEquipment app) Add operator to machine authorized user list
Ensure more than 4.5 m (15 ft) from other Bluetooth equipped machine
Enable phone Bluetooth and connect myEquipment app
Change Bluetooth system
enable status to enabled (Cat dealer)
Contact local Cat dealer if unable to see machine Bluetooth device