AVSPARE.COM
parts catalog

PLATE-REINFORCEMENT 2444041 - Caterpillar


2444041 PLATE-REINFORCEMENT Caterpillar parts 315C, 315D L
Rating:
65
Alternative (cross code) number:
CA2444041
244-4041
2444041
Caterpillar 2444041 PLATE-REINFORCEMENT

Buy PLATE-REINFORCEMENT 2444041 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2444041:

EXCAVATOR  315C   315D L   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:

operate the machine while you are in a seat. The seat belt must be fastened while you operate the machine. Only operate the controls while the engine is running.Check for proper operation of all controls and of all protective devices while you operate the machine slowly in an open area.When the machine is moving, watch the clearance of the boom. Uneven ground can cause the boom to move in all directions. Make sure that no personnel will be endangered before you move the machine. Do not allow riders on the machine unless the machine has the following equipment:
additional seat
additional seat beltReport any machine damage that was noted during machine operation. Make any necessary repairs.Keep implements approximately 40 cm (15 inches) above ground level while you drive the machine. Do not drive the machine close to an overhang, to the edge of a cliff, or to the edge of an excavation.If the machine begins to sideslip on a grade, immediately dump the load and turn the machine downhill.Be careful to avoid any ground condition which could cause the machine to tip. Working on the following ground conditions can cause a machine to tip:
Hills
Banks
SlopesCrossing the following ground conditions can also cause a machine to tip:
Ditches
Ridges
Unexpected obstaclesWhen possible, operate the machine up slopes and down slopes. Avoid operating the machine across the slope, when possible.Keep the machine under control. Do not overload the machine beyond capacity.Avoid changing the direction of travel on a slope. This could result in the tipping or the side slipping of the machine.Bring the load close to the machine before travelling distances or swinging the load.Lifting capacity decreases as the load is moved further from the machine.Make sure that the towing eyes and the towing devices are adequate for your needs.Only connect trailing equipment to a drawbar or to a hitch.Never straddle a wire rope cable. Never allow other personnel to straddle a wire rope cable.When you maneuver in order to connect the equipment, make sure that no personnel are between the machine and trailing equipment. Block up the hitch of the trailing equipment in order to align the equipment with the drawbar.Check the local codes, state codes, and/or directives of the job site for a specific minimum distance from obstacles.Before you operate the machine check with the local utilities for the locations of any underground utilities.Know the maximum dimensions of your machine.Watch the load at all times. Always keep the Falling Objects Guard Structure installed during machine operation.The clamshell can swing in all directions. Move the implement control levers in a smooth motion. Failure to move the implement control levers in a smooth motion can cause the clamshell to swing into the cab or into a person in the work area. This will result in a personal injury.

Caterpillar parts catalog:

Caterpillar parts catalog
315C & 315C L Excavators CFB00001-UP (MACHINE) POWERED BY 3046 Engine
315D L Excavator CJN00001-UP (MACHINE) POWERED BY C4.2 Engine
315D L Excavator JGS00001-UP (MACHINE) POWERED BY C4.2 Engine


Parts plate Caterpillar catalog:

8P9770 PLATE
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
1039288 PLATE-THRUST
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 315, 315B, 315C, 317B LN, 318B, 906, 90...
5P9891 PLATE-WARNING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307, 307B, 307D, 307E, 308E, 311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315C, 317, 318B, 318C, 319C, 320 L, 320B, 3...
1348948 PLATE
115, 312, 315, 315C, 317, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C...
4I3308 PLATE
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM ...
1076954 PLATE-FRICTION
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 32...
2531346 PLATE-WARNING
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
1686761 PLATE AS
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
7Y1746 PLATE
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
1453035 PLATE
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 3...
1733444 PLATE
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
1733443 PLATE
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.