PLATE GP-HEAT EXCHANGER 2459826 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    Note: Put identification marks on all wires for installation purposes.Note: The counterweight was removed for photographic purposes.
Illustration 1 g00869098
View of the engine from the rear
Turn the battery disconnect switch to the OFF position.Note: Use Illustration 1 as a reference for all of the photographic illustrations in the removal and the installation procedure.
Illustration 2 g00869231
Remove bolt (1), and move the harness assembly aside.
Remove bolt (2), and move the harness assembly aside.
Remove nut (3). Disconnect battery cable and wiring harness (4) .
Remove nut (5), and remove cover (6) .
Illustration 3 g00869226
Remove bolt (7), and disconnect wire (8) .
Illustration 4 g00869254
Remove bolts (9) that secure the electric starting motor to the flywheel housing. Remove electric starting motor (10). Installation Procedure
Illustration 5 g00869254
Position electric starting motor (10) in the flywheel housing. Install bolts (9) .
Illustration 6 g00869226
Connect wire (8), and install bolt (7) .
Illustration 7 g00869231
Position cover (6), and install nut (5) .
Connect battery cable and wiring harness (4), and install nut (3) .
Position the harness assembly, and install bolt (2) .
Position the harness assembly, and install bolt (1) .