PLATE 2482538 - Caterpillar

2482538 PLATE Caterpillar parts 992K

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2482538
248-2538
2482538

Weight: 15 pounds 7 kg.

Buy PLATE 2482538 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 2482538:

WHEEL LOADER 992K Caterpillar

Number on catalog scheme: 12

For full view, you need register

Information:

Illustration 7 g03876973
Install bolts (G) and washers (H) back to the drive motor. Tighten to 270 40 N m (200 30 lb ft).Installation of ladder clips on 279D and 289D CTLs only
Illustration 8 g03885652
(M5) 15 degrees (3) 4P-8134 Clip (6) 8T-4121 Hard Washer (7) 8T-4136 Bolt
Install ladder clip (3) in holes on back side of frame. Rotate the top and bottom clips to 15 degrees (M5) as shown. Torque bolts to 30 7 N m (265 60 lb in).Installation of ladder clips on 299D CTLs only
Illustration 9 g03885779
(M5) 38 degrees (3) 4P-8134 Clip (6) 8T-4121 Hard Washer (7) 8T-4136 Bolt
Install ladder clip (3) in holes on back side of frame. Rotate the top and bottom clips to 38 degrees (M5) as shown. Torque bolts to 30 7 N m (265 60 lb in).Installation for Models 279D, 289D, 299D, 299D XHP, 299D2, and 299D2 XHP Only
Secure speed sensor harness.
Illustration 10 g03886012
(2) 3S-2093 Cable Strap (4) 7K-1181 Cable Strap (5) 7R-4897 Abrasion Sleeve
Use strap (2) to secure sleeve (5) to speed sensor barrel.
Route harness over top of ladder clip.
Position the DT connector (under sleeve) on top of lower ladder clip and secure with strap (4). Ensure that tie strap is secured to the female side of the connector.
Use strap (4) to secure harness to upper ladder clip.Note: Take the slack out of the harness between the sensor and the upper ladder clip before securing. Loop excess harness between clips and push the excess behind the sail plate gusset.
Illustration 11 g03886204
(1) 204-2281 Cable Strap (4) 7K-1181 Cable Strap
Use strap (4a) to secure the harness to the brake line on the right side of machine, and to the drain line on the left side.
Use strap (1a) to secure harness to all hoses except the bottom drive line.
Use strap (4b) to secure the harness to the brake line on the right side of machine, and to the drain line on the left side.
Use strap (1b) to secure harness to all hoses.
Use strap (4c) to secure harness to upper drive line.
Use strap (1c) to secure harness to all hoses.Installation for Model 259D Only
Secure speed sensor harness.
Illustration 12 g03886284
(2) 3S-2093 Cable Strap (4) 7K-1181 Cable Strap (5) 7R-4897 Abrasion Sleeve
Use strap (2) to secure sleeve (5) to speed sensor barrel.
B. Route harness over top of upper ladder clip and wrap around below as shown. Use strap (4) to secure.Note: Take the slack out of the harness between the sensor and the upper ladder clip before securing.
Position the DT connector (under sleeve) on top of lower ladder clip and secure with strap (4). Ensure that tie strap is secured to the female side of the connector.
Illustration 13 g03886331
(1) 204-2281 Cable Strap (4) 7K-1181 Cable Strap
Use one strap (4a) to secure the harness to the drain and brake lines.
Use one strap (4b) to secure the harness to the drain and brake lines.
Use

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

992K Wheel Loader RM200001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » M00701340843

992K Wheel Loader KK200001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » M00701360843

992K Wheel Loader KK400001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » M00847430801

992K Wheel Loader RM500001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » M00847450806

992K Wheel Loader H4C00001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » SEBP41400927

992K Wheel Loader 88000001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » SEBP57190990

992K Wheel Loader ZMX00001-UP (MACHINE) POWERED BY C32 Engine

248-2524: PIN & SEAL GP-LINKAGE » SEBP57750920

Parts plate Caterpillar catalog:

8P9770 PLATE
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...

2531752 PLATE-THRUST
16G, 16H NA, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L M...

1129217 PLATE-THRUST
16G, 16H NA, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L M...

2541126 PLATE
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F, 621H, 773F, 775F, 777F, 854K, 938H, 992K, 993K, CB-54B, CW-34

2291663 PLATE-THRUST
773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777F, 777G, 844H, 844K, 854K, 990H, 990K, 992K, 993K, AD55B, AD60, C27, C32, D10N, D10R, D10T, D10T2, TH48-E70

1T1646 PLATE
773G, 773G OEM, 775G, 775G OEM, 776C, 776D, 777, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D, 854G, 854K, 992G, 992K, 993K, CX48-P2300, SPF343C, TH48-E70, TH48-E80

4J3816 PLATE
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...

4Y5812 PLATE
235D, 365B, 365B II, 740, 740B, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 824G II, 824H, 834B, 834G, 834H, 836, 836G, 836H, 844, 844H, 844K, 854G, 854K, 950F, 950F II, 95...