PLATE 2496959 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00748139
Disconnect wiring harness connector (3) from fuel pressure sensor (2) .
Remove fuel pressure sensor (2) from fuel transfer pump (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00748139
Install fuel pressure sensor (2). Tighten fuel pressure sensor (2) to a torque of 10 2 N m (7.3 1.4 lb ft).
Connect wiring harness connector (3) to fuel pressure sensor (2) .