PLATE-WEAR 2500963 - Caterpillar

SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Group Number 1
Inspect the 9S-1838 Master Link Bolts on the D6G and D6G II LGP Track-Type Tractors.
- If the 9S-1838 Bolts have failed, replace the bolts with new 9S-1838 Bolts. Tighten the bolts to a torque of 300 +/- 50 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
- If the 9S-1838 Bolts have not failed, verify the torque on the bolts. Tighten the 9S-1838 Bolts to a torque of 300 +/- 50 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
Image1.1.1
Group Number 2
The D7G may be equipped with either 2P-9670 or 9W-9058 Bolts. The two bolts have different torque specifications. The bolts can be identified by the size:
- 2P-9670 Bolt size is 3/4-16
- 9W-9058 Bolt size is 7/8-14
Inspect the 2P-9670 Master Link Bolts D7G Track-Type Tractors.
- If the 2P-9670 Bolts have failed, replace the bolts with new 2P-9670 Bolts. Tighten the 2P-9670 Bolts to a torque of 300 +/- 50 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
- If the bolts have not failed, verify the torque on the bolts. Tighten the bolts to a torque of 300 +/- 50 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
OR
Inspect the 9W-9058 Master Link Bolts on D7G Track-Type Tractors.
- If the 9W-9058 Bolts have failed, replace the bolts with new 9W-9058 Bolts. Tighten the bolts to a torque of 340 +/- 70 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
- If the 9W-9058 Bolts have not failed, verify the torque on the bolts. Tighten the bolts to a torque of 340 +/- 70 Nm. Then, turn the bolts an additional 180 +/- 5 degrees.
Image2.1.1