PLATE AS 2501037 - Caterpillar

Parts and Specification Information
Illustration 1 g03865195Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information.
Table 1
Item Part Number Description Qty Specification Approximate Weight
1 450-6701 Film 1
2 299-7935 Film 1
3 450-6702 Film 1
4 450-6703 Film 1
5 279-9304 Film 1
6 450-6704 Film 1 Installation Procedure
Illustration 2 g03865205
(A) 170 mm (6.7 inch)
(B) 50 mm (2 inch)
(C) 30 mm (1.2 inch)
(D) 30 mm (1.2 inch) Note: Insure all surfaces are clean and free of dirt or debris before applying films.
Install film (1) on the center of the front radiator.
Install film (2) 170 mm (6.7 inch) from the bottom of the canopy and 50 mm (2 inch) from the angle.
Install film (3) on the left side of the body 30 mm (1.2 inch) from the top and side.
Install film (4) on the right side of the body 30 mm (1.2 inch) from the top and side.
Illustration 3 g03865239
(E) 210 mm (8.25 inch)
(F) 10 mm (0.4 inch)
(G) 110 mm (4.3 inch)
(H) 10 mm (0.4 inch)
Install film (5) to the side of the cab 110 mm (4.3 inch) from the edge of the door and 210 mm (8.25 inch) from the bottom.
Install film (6) to the side of the cab 10 mm (0.4 inch) from the bottom and side.