AVSPARE.COM
parts catalog

PLATE GP-SCREED 2501071 - Caterpillar



2501071 PLATE GP-SCREED Caterpillar parts AS2301 PLATE
Rating:
40
Alternative (cross code) number:
CA2501071
250-1071
2501071
Caterpillar 2501071 PLATE GP-SCREED

Buy PLATE GP-SCREED 2501071 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT SCREED,

Compatible equipment models: 2501071:

ASPHALT SCREED  AS2301   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:

Walk - Around Inspection
For your own safety and maximum service life of the machine, make a thorough walk - around inspection before mounting the machine to start the engine.Look around and under the machine for such items as loose bolts, trash build - up, oil or coolant leaks, broken or worn parts. Inspect the condition of the attachments and the hydraulic components.Refer to "Walk - Around Inspection" in the "Maintenance Section" for detailed walk - around inspection information.Pre - Start Checks
1. Unlatch and open the engine access covers to gain access to the engine compartment and the coolant reservoir. 2. Measure the engine oil level. Maintain the oil level between the ADD and FULL marks on the dipstick.3. Close and latch the engine access cover. 4. Observe the coolant level in the reservoir. Maintain the coolant level between the LOW and FULL marks on the reservoir. 5. To measure the hydraulic oil level, place the machine on level ground and lower the bucket to the ground with the stick vertical, as shown above, and stop the engine.Clamshell bucket should be opened and on the ground. 6. Observe the hydraulic oil level. Maintain the oil level between the marks in the appropriate temperature range. 7. The fuel tank drain valve is located under the fuel tank. Open the valve and allow moisture and sediment to drain.This should be done at the start of each shift since water and moisture precipitate overnight.After draining, be sure to close the valve. 8. Observe the fuel level in the fuel tank. Maintain the fuel level near the full mark on the sight gauge.Filling the fuel tank with fuel should be done at the end of the day's work to drive out moisture laden air and prevent condensation.After filling, be sure to lock the tank cap to protect against vandalism.Refer to the "Every 10 Service Hours or Daily" in the "Maintenance Section" for more detailed information.Seat Adjustment
1. Adjust the seat to allow full pedal travel with the operator's back against seat back. 2. Adjust the seat belt to fit snug.3. Adjust the mirror to allow proper viewing from the seat to see close behind the machine.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
AS2301 Screed AWC00001-UP


Parts plate Caterpillar catalog:

2540054 PLATE & FILM GP
AP-1055D, AS2301, BG-2455D, BG-260D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.