PLATE-WEAR 2544987 - Caterpillar

Illustration 1 g01377323
Note: Tighten two bolts on each side of each corner. Tighten all bolts. Torque the bolts in the corners again. Torque the bolts over the ends of the seal. (1) Torque for 70 bolts ... 61.0 9.5 N m (45 7 lb ft) (2) Position the ends of the seal in a crisscross pattern, as shown. (3) Torque for two bolts ... 30 5 N m (22 4 lb ft) (4) 1L-4349 Spring Length under test force ... 106.0 mm (4.17 inch) Test force ... 83.9 6.7 N (19.0 1.5 lb) Free length after test ... 139.7 mm (5.50 inch) Outside diameter ... 24.41 mm (0.961 inch) (5) Pressure setting for bypass valve ... 35 kPa (5 psi) (6) Torque for locknut ... 13.0 1.5 N m (115 13 lb in) (7) Because of limited clearance, reverse the two bolts next to the tube. (8) Do not tighten rod.