PLATE-CLUTCH 2578634 - Caterpillar

Illustration 1 g00855391
Side View
Illustration 2 g00855455
Rear ViewSpecifications are shown for basic machines without a work tool on the quick coupler.
Table 1
TH350B Machine    
Overall Height (A)     2590 mm (8 ft 6 inch)    
Overall Length (B)    
5200 mm (17 ft 1 inch)    
Overall Width (C)    
2440 mm (8 ft 0 inch)    
Wheel Base    
3050 mm (10 ft 0 inch)    
Ground Clearance    
500 mm (1 ft 7.7 inch)    
Approximate Weight    
8260 kg (18200 lb)    
Table 2
TH355B Machine    
Overall Height (A)    
2590 mm (8 ft 6 inch)    
Overall Length (B)    
6335 mm (20 ft 9 inch)    
Overall Width (C)    
2440 mm (8 ft 0 inch)    
Wheel Base    
3200 mm (10 ft 6 inch)    
Ground Clearance    
500 mm (1 ft 7.7 inch)    
Approximate Weight    
8820 kg (19400 lb)    
Table 3
TH360B Machine    
Overall Height (A)    
2590 mm (8 ft 6 inch)    
Overall Length (B)    
6385 mm (20 ft 11 inch)    
Overall Width (C)    
2440 mm (8 ft 0 inch)    
Wheel Base    
3200 mm (10 ft 6 inch)    
Ground Clearance    
500 mm (1 ft 7.7 inch)    
Approximate Weight    
9720 kg (21400 lb)    Intended Use
This vehicle is classified either as:
A self-propelled variable reach truck (Telehandler) as defined in "ISO 3691-2" and "EN 1459:1998"
An agricultural tractor when meeting the requirements of European Union Directive 74/150/EECThis vehicle is all wheel drive and has all wheel steer ability. This vehicle has a rigid chassis with a variable reach boom mounted centrally on to which a range of Caterpillar approved attachments may be attached.As a machine, the vehicle has a primary use as a material handler to pickup and place materials. As an agricultural tractor, the vehicle has a primary use for towing.Application/Configuration Restrictions
Maximum approved operating weight - TH350B ... 10100 kg (22220 lb) TH360B ... 12100 kg (26620 lb)Maximum drawbar towing force - Refer to Operation and Maintenance Manual, "Towing the Machine" for more information.Maximum drawbar vertical load - Refer to Operation and Maintenance Manual, "Towing the Machine" for more information.Maximum fore and aft slope on this machine in a static condition to maintain proper lubrication -
For machines equipped with a 92 kW engine, 57.7 percent grade or 30 degrees
For machines equipped with a 74.5 kW engine, 44.5 percent grade or 24 degrees