PLATE AS.- 2601195 - Caterpillar

Illustration 1.
The 129-4741 T-Bar Latch Assembly. Replacement of the 126-7168 Lock with the new 129-4741 T-Bar Latch Assembly requires modification of the 139-0515 Cover as described in the installation procedure.
The 129-4741 T-Bar Latch Assembly Installation Procedure
1. Remove the old 126-7168 Lock. Retain the 139-0161 Plate for reuse with the new "T-Bar" latch.2. Redrill the existing hole to increase the diameter from 22 mm to 23 mm to accept the new 129-4741 T-Bar Latch Assembly.
Illustration 2.
Hole Drilling Details.3. Drill two 7.5 mm holes as shown in Illustration 2. Use the centerline of the existing hole as a reference point for locating the new holes. See Illustration 2.4. Install the 129-4741 T-Bar Latch Assembly to the toolbox cover using the 6V-7743 Locknuts (2).5. Assemble the 139-0161 Plate (4) to the new latch assembly using the 8T-4133 Nuts (3). Adjust plate (4) on the shaft of the latch assembly to achieve the desired fit of the toolbox cover.