PLATE 2614442 - Caterpillar

Features/Benefits
* Used to adjust tension on Mobil-Trac belts (all parts come assembled as shown)* Allows Challenger's hydraulic system to increase tension by directing oil from implement valve through hose assembly and into tension cylinder* Hose group directs oil from tension cylinder back into sump during detensioning* One end of hose assembly attaches to tension cylinder and other end to implement valve located at the rear of Challenger* 6V-4143 Coupler Assembly (14), 3B-6552 Pipe Elbow (15) and 8T-3613 Nipple Assembly (16) are only required when cylinder guard is in place* Includes a hose and hose clamp for bleeding oil from nitrogen accumulator (part of belt tensioning system)Specifications/Technical Information
5P-6442 Hose:
Length - 200 cm (79.0 inch)Inside diameter - 6.3 mm (.25 inch)
1U-9058 Hose Group(1) 5P-6442 Hose. (2) 1P-4278 Hose Clamp. (3) 6V-4144 Coupler Assembly. (4) 1U-9649 Hose Assembly. (5) 2D-7325 Pipe Tee. (6) 8T-0859 Pressure Gauge. (7) 8S-7169 Pipe Coupling. (8) 5P-8998 Pipe Nipple. (9) 1S-8937 Needle Valve. (10) 6V-3966 Nipple Assembly. (11) 1U-9650 Hose Assembly. (12) 6B-5072 Bushing. (13) 9X-2018 Nipple Assembly. (14) 6V-4143 Coupler Assembly. (15) 3B-6552 Pipe Elbow. (16) 8T-3613 Nipple Assembly. (17) 6V-7145 Case. (18) 4C-8765 Oil Sorbent.