PLATE AS 2643334 - Caterpillar

1. Remove two bolts (2), the washers and shield (1) from the engine. The nuts do not have to be removed from the studs to remove the exhaust manifold. The exhaust manifold is notched (slotted) so that it can be lifted from the studs.2. Loosen nuts (4), and remove exhaust manifold (3) and the gaskets from the engine. Lift the left side of the exhaust manifold, and slide it toward the rear of the machine to remove it from the engine. The following steps are for installation of the exhaust manifold.3. If a replacement of the studs is necessary, put 5P3931 Anti-Seize Compound on the threads of the studs. Install the studs, and tighten them to a torque of 27 4 N m (20 3 lb ft).4. Install new gaskets on the studs.5. Put 5P3931 Anti-Seize Compound on the threads of the studs and nuts.6. Put exhaust manifold (3) in position on the engine, and install the washers, the bracket assemblies and nuts (4) that hold it in place.7. Put shield (1) in position on the exhaust manifold, and install the washers and bolts (2) that hold it in place.End By:a. install fuel injection linesb. install turbocharger