PLATE-CLUTCH 2770437 - Caterpillar

a maximum service life of the machine, complete a thorough daily inspection before you mount the machine and before you start the engine.
Daily, perform the maintenance requirements that are applicable to your machine. Reference: For more information on the daily maintenance requirements, refer to Operation and Maintenance Manual, "Maintenance Interval Schedule".
Inspect the area around the machine and under the machine. Look for loose bolts, trash buildup, oil, fluid leakage, broken parts, or worn parts.
Watch closely for leaks. If you observe a leak, find the source of the leak and correct the leak. Replace hoses, as needed. If you suspect a leak or you observe a leak, check the fluid levels more frequently.
Inspect the engine compartment. Remove any debris buildup from the engine compartment. Inspect the engine for any obvious component damage.
Inspect the hydraulic system for leaks. Check the hydraulic tank, all hoses and all tubes. Inspect plugs, seals, couplings and fittings. Fix any leaks and replace hoses, as needed.
Inspect all attachments and the linkages for wear and for damage.
Make sure that all access doors, all access covers and all guards are secured. Inspect the access doors, the access covers and the guards for damage.
Inspect the tires for damage. Replace any missing valve caps.
Inspect the steps, the walkways and the handholds. Remove any debris. Repair any damage or replace any damaged parts.
Inspect the lights. Replace any broken bulbs and any broken lenses.
Inspect the Rollover Protective Structure (ROPS) for obvious damage. Consult your authorized dealer for repairs.
Inspect the operator compartment. Remove any trash buildup. Keep the operator compartment clean. Inspect the dash panel for broken gauges and for broken indicator lights. Replace any broken parts.
Inspect the seat belt, the buckle and the mounting hardware. Replace any components that are worn or damaged. For more information, refer to Operation and Maintenance Manual, "Seat Belt - Replace".
Adjust the mirrors for best visibility.
Inspect the windows. Make sure that the operator's vision is not impaired by dust, by mud, or by other foreign materials. Clean the windows, if necessary. For more information, refer to Operation and Maintenance Manual, "Windows - Clean".
Make all necessary repairs before you operate the machine.