PLATE AS 2918257 - Caterpillar

Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch before you service equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
340-2922 Front Lines Gp Revision Level 01    
Item    Qty    Part No.    Description    
(1)     1     342-4097     Hose As    
(2)     1     337-2732     Block    
(3)     1     342-4142     Block    
(4)     1     342-4143     Support    
(5)     1     342-4144     Support    
(6)     1     342-4085     Hose As    
(7)     3     1P-3703     Rectangular Seal    
(8)     1     1P-3704     Rectangular Seal    
(9)     2     1P-5767     Half Flange    
(10)     6     6V-0400     Half Flange    
(11)     8     8T-4139     Bolt    
(12)     12     8T-4184     Bolt    
(13)     4     8T-4194     Bolt    
(14)     24     8T-4223     Hard Washer    
Illustration 2 g02635818
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g02636038
(1) 342-4097 Hose As (2) 337-2732 Block (3) 342-4142 Block (4) 342-4143 Support (5) 342-4144 Support (6) 342-4085 Hose As (7) 1P-3703 Rectangular Seal (8) 1P-3704 Rectangular Seal (9) 1P-5767 Half Flange (10) 6V-0400 Half Flange (11) 8T-4139 Bolt (12) 8T-4184 Bolt (13) 8T-4194 Bolt (14) 8T-4223 Hard Washer
Install the front lines group. Refer to Illustration 3.
Unless otherwise specified, tighten all hardware and fittings to standard torque. ReferenceTorque Specifications, SENR3130, " Torque Specifications"
Illustration 4 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation of the hydraulic kit is complete.