PLATE AS 2948678 - Caterpillar

Hoist Control Lever (27)
The body must be lowered and in the FLOAT position when operating the machine. This will help prevent damage to the body, caused by vibrations from the haul road.
LOWER Position - Hold the hoist control levercompletely forward to lower the dump body. When the lever is released, the lever will return to the FLOAT position .
FLOAT Position - When the hoist control lever is in the FLOAT position, the dump body will seek a level. The hoist control will stay in this position until the lever is manually moved.
HOLD Position - When the hoist control is in the HOLD position, the dump body will not move. The hoist control will stay in this position until the lever is manually moved.
RAISE Position - Hold the hoist control levercompletely backward to raise the dump body and empty the load. When the lever is released, the lever will return to the HOLD position .Control Pedal for the Secondary Brake System (28)
To avoid the possibility of a unexpected machine movement when parking on a slope, always block the wheels securely before leaving the machine unattended.If the secondary brake system is required in order to stop the machine, do not operate the machine until a complete check has been made of the entire braking system and until all necessary repairs have been made.
Control Pedal for the Secondary Brake System (28) - Use secondary brake control (28) to stop the machine if service brake control (21) does not stop the machine properly.Refer to Operation and Maintenance Manual, "Braking" for additional information.Power Window Switch (29)
Power Window Switch (29) - Push the top half of the switch to close the window on the left side of the cab. Push the bottom half of the switch to open the window.VIMS Service Port (30) and (36)
VIMS Service Port (30) and (36) - This service port allows service personnel to connect