PLATE 2A6662 - Caterpillar

Illustration 4 g03741607
Press throttle control switch (3) in order to place the engine in low idle. Note: Two things indicate when the engine is at low idle. First, the engine rpm will appear on machine display (4). Second, the indicator light next to the throttle switch will go out.
Illustration 5 g03737031
Move engine start switch (5) to the OFF position in order to shut off the engine.
Illustration 6 g03742037
Connect Tool (B3) to diagnostic connector (6). Adjustment Procedure
Move engine start switch (5) to the START position, do not start the engine.
Open the Cat® ET program on Tool (A).
Illustration 7 g03746905
Select "Service" button (7). From the drop-down list, select "Calibrations" (8).
Illustration 8 g03746915
Select "Steering Sensor Calibration" (9).
Select "Start" button (10).
Illustration 9 g03746933
Read the on screen warnings. Select "OK" button (11).
Illustration 10 g03746946
Select "Front Steering Sensor Calibration" (12) and "Rear Steering Sensor Calibration" (14).
Select "Begin" button (13).
Illustration 11 g03746957
Follow set up instructions (15).
Engine must be running.
Propel lever (1) must be in the NEUTRAL position.
Parking brake switch (2) must be in the OFF position.
Verify that all conditions are met then select "Next" button (16).
Illustration 12 g03746989
Follow on screen instruction (17).
Turn the front wheels fully left.
Select "Next" button (16).
Illustration 13 g03747202
Follow on screen instruction (18).
Turn the front wheels fully right.
Select "Next" button (16).
Illustration 14 g03747219
When the front steering sensor calibration is complete, a "Calibration Successful" window will open. Select "Continue" button (19).
Illustration 15 g03747223
Follow on screen instruction (20).
Engine must be running.
Propel lever (1) must be in the NEUTRAL position.
Parking brake switch (2) must be in the OFF position.
Select "Next" button (16).
Illustration 16 g03747231
When the rear steering sensor calibration is complete, a "Calibration Successful" window will open. Select "Finish" button (21).
Move parking brake switch (2) to the ON position.
Press throttle control switch (3) in order to place the engine in low idle. Note: Two things indicate when the engine is at low idle. First, the engine rpm will appear on machine display (4). Second, the indicator light next to the throttle switch will go out.
Move engine start switch (5) to the OFF position in order to shut off the engine.
Remove the tooling.