PLATE ASSEM. 2D7089 - Caterpillar

Illustration 1 g06005068
Machine Menu
From the Machine Settings menu, use the arrow button to highlight the desired parameter. Press the OK button to gain access to the highlighted parameter screen. Follow the screen prompts to adjust the parameter. All the parameters in this category relate to the operator preferences for the work tool operational modes. The following parameters can be adjusted:
Stable Blade – Enabled, Disabled
Blade Response – Fine, Standard, Fast
Machine Response – Low, Medium, High
Steering Modulation – Low, Medium, High
Brake Pedal Decel – Enabled, Disabled
Automatic Traction Control – Low, Medium, High
Automatic Engine Speed – 300 sec, 240 sec, 180 sec, 120 sec, 90 sec, 60 sec, 30 sec, Disabled
Fan Purge Duration – 60 sec, 40 sec, 25 sec, 15 sec, 10 sec, 5 sec
Fan Purge Interval – 120 min, 90 min, 60 min, 45 min, 30 min, 20 min, 15 min
Factory SettingsBlade Response
Illustration 2 g03870555
Blade Response screen
Steering Modulation
Illustration 3 g06022536Auto Engine Speed Control (AESC)
Illustration 4 g06008211
Illustration 5 g03870582Disable the "Auto Engine Speed" feature to set a delay time. The "Delay Time" prior to auto engine speed engaging can be set from 3 to 60 seconds. If the "Auto Engine Speed" feature is enabled, no delay time can be set.