PLATE 2D7936 - Caterpillar

Illustration 1 g03730644
Table 1
Specification for 199-5531 Track Link As
Item Qty Part Specification Description
- - - Use the following procedure to tighten the track bolts:
1. Torque the bolts to 870 90 N m (642 66 lb ft).
2. Tighten the bolts by an additional turn of 120 5 degrees.
3. Install the nuts so that the flat side of the nut is against the link.
- - - The maximum force for the track link assembly is 780000 N (175352 lb).
- - - The reference setting force is 595000 N (133762 lb).
A - - Distance between the bolt holes is 170.00 0.39 mm (6.693 0.015 inch).
B - - Distance between the bolt holes is 230.00 0.39 mm (9.055 0.015 inch).
C - - Distance between the bolt holes is 170.00 0.80 mm (6.693 0.032 inch).
D - - Distance between the bolt holes is 230.00 0.80 mm (9.055 0.032 inch).
E - - End play for the link assembly is 0.00 to 2.00 mm (0.000 to 0.079 inch).
F - - Protrusion at one end of the pin is 3.5 0.8 mm (0.14 0.03 inch).
G - - Distance from the end of the pin to the surface of the stopper is 8.00 2.00 mm (0.315 0.079 inch).
H - - Bushing protrusion at each end 1.66 0.13 mm (0.065 0.005 inch).