AVSPARE.COM
parts catalog

PLATE ASSEM. 2H9191 - Caterpillar



2H9191 PLATE ASSEM. Caterpillar parts D337 PLATE
Rating:
14
Alternative (cross code) number:
CA2H9191
2H-9191
2H9191
Caterpillar 2H9191 PLATE ASSEM.
Weight: 12 pounds 5 kg.

Buy PLATE ASSEM. 2H9191 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 2H9191:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

START BY:a. remove bucketb. remove tilt cylinderc. remove bucket lever and link 1. Put a block under the lift arms to hold the lift arms up when the lift cylinders are disconnected. 2. Fasten a strap and hoist to the rod of the lift cylinder as shown. Remove grease fitting (1) and bolt (2) from the pin.
943 Shown3. Install tooling (A) on a 943 or (B) on a 953 as shown, and fasten a strap to hold the tooling when the pin is clear of the cylinder. The tooling will fall if it is not held in some way. Use the tooling to remove the pin from the rod end of the lift cylinder.
To prevent damage to the oil tube on the lift cylinder, put a block (3) under the cylinder when it is lowered.
4. Lower the lift cylinder on to block (3).5. Do Steps 2 through 4 again for the other lift cylinder. 6. Remove grease fitting (4) and bolt (6) from the pins that hold the lift arms to the frame. Remove the bolts that hold guards (5) for the lights in place. Move the guards clear of the pins, and use a piece of wire to hold the guards. 7. Fasten a hoist to the lift arms. Install tooling (A) as shown, and fasten a strap to hold the tooling when the pin is clear of the frame. The tooling will fall if it is not held in some way. Use tooling (A) to remove pins (7) that hold the lift arms to the frame. 8. Remove lift arms (8). Weight of the 943 lift arm is 743 kg (1650 lb.). Weight of the 953 lift arms is 927 kg (2060 lb.).Install Lift Arms
1. Put clean grease on the bearing in the lift arms. Fasten a hoist to lift arms (1), and put the lift arms in position on the frame. Weight of the 943 lift arms is 743 kg (1650 lb.). Weight of the 953 lift arms is 927 kg (2060 lb.). 2. Install pins (2) that hold the lift arms to the frame. Be careful not to damage the seals in the lift arms when the pins are installed. 3. Install bolts (4) that hold the pins in place, and tighten the bolts to a torque of 200 25 N m (150 20 lb.ft.). Install grease fittings (3) in the pins.4. Put guards (5) and the lights in position on the frame, and install the bolts that hold them in place. 5. Put the rod end of the lift cylinders in position on the lift arms, and install pins (6) that hold them in place. Be careful not to damage the seals in the lift arms when the pins are installed.6. Install the bolts that hold the pins in place, and tighten the bolts to a torque of 200 25 N m (150 20 lb.ft.). Install the grease fittings in the pins. Use a grease gun to push clean

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455


Parts plate Caterpillar catalog:

2F2006 PLATE
955C, D315, D337, D342, D364, D375D, D379, D379A, D397D, D398, D398A, D399, D8H, G379, G398
8F4102 PLATE
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M ...
4F2288 PLATE
D315, D337, D397D
5H9247 PLATE
955C, D326F, D337
1H1063 PLATE SERIAL NUMBER
1693, 3145, 3150, 3304, D326F, D330A, D337, D337F, D342, D342C, D346, D348, D353C, D364, D375D, D397D, D398A
4H0774 PLATE
D364, D375D, D397D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.