PLATE 2K0714 - Caterpillar

Fuel Injection Line With Support Bracket
Be sure the fuel injection line clamps are installed in the correct locations. Incorrectly installed clamps may allow the fuel injection lines to vibrate and become damaged. The damaged lines may leak and cause a fire.
(1) Clamp location dimensions are in reference to a vertical line (1) through the center of the number one fuel pump outlet.Align brackets in position to fuel lines such that when the fasteners are tightened no strain will be added to the fuel lines while tightening fasteners.(A) ... 52.7 13 mm (2.07 .51 in)(B) ... 186 13 mm (7.32 .51 in)(C) ... 206 13 mm (8.11 .51 in)(D) ... 244 13 mm (9.61 .51 in)(E) ... 313 13 mm (12.32 .51 in)(F) ... 330 13 mm (12.99 .51 in)(G) ... 426 13 mm (16.77 .51 in)(H) ... 434 13 mm (17.09 .51 in)(I) ... 532 13 mm (20.94 .51 in)(J) ... 703 13 mm (27.68 .51 in)Tighten metal-to-metal clamps to a torque of ... 2.3 N m (20 lb in) The 6V4980 Torque Screwdriver Tool Group is available for applying the correct torque. (2) Tighten fuel injection line nuts to ... 40 7 N m (30 5 lb ft)(3) Tighten nuts to ... 14 3 N m (10 2 lb ft)