PLATE-WEAR 3109088 - Caterpillar

Illustration 3 g06009894
Detailed view of area B
Table 2
Item Qty Part Specification Description
4 4 468-7795 Bearing Bore after assembly is 90.050 to 90.235 mm (3.5453 to 3.5526 inch).
5 10 9R-0158 Washer Thickness of one washer is 3.0 mm (0.12 inch) should be used until gap prevent fitment.
6 1 360-2822 Pin Diameter is 44.966 to 45.024 mm (1.7703 to 1.7726 inch).
7 2 9R-5828 Bushing Bore after assembly is 45.238 0.047 mm (1.7810 0.0019 inch).
8 1 362-3274 Pin Diameter is 44.95 to 45.00 mm (1.770 to 1.772 inch).
9 1 364-3012 Pin Diameter is 54.95 to 55.00 mm (2.163 to 2.165 inch).
Illustration 4 g06009896
Detailed view of area C
Table 3
Item Qty Part Specification Description
10 As required, use the following spacers to provide a maximum clearance of 1.0 mm (0.04 inch). Position the spacers to equalize the clearance within 3.0 mm (0.12 inch) between the wear bars on the lift arms and the wear bars on the radiator guard for each side of the machine.
2 128-7903 Spacer Thickness of one spacer is 3.0 mm (0.12 inch) should be used until gap prevent fitment.
3 128-7905 Spacer Thickness of one spacer is 1.0 mm (0.04 inch) should be used to reduce gaps.
11 1 362-3269 Pin Diameter is 49.966 to 50.024 mm (1.9672 to 1.9694 inch).
12 1 362-3270 Pin Diameter is 49.966 to 50.024 mm (1.9672 to 1.9694 inch).
13 As required, use the following washers to provide a clearance of 0.0 to 2.0 mm (0.00 to 0.08 inch) inside the lift arms. Equalize washers to center the bucket on the lift arms.
3 363-2855 Shim Thickness of one shim is 1.0 0.2 mm (0.04 0.01 inch) should be used to reduce gaps.
2 363-2856 Shim Thickness of one shim is 3.0 0.2 mm (0.12 0.01 inch) should be used until gap prevent fitment.
14 2 360-2821 Pin Diameter is 44.966 to 45.024 mm (1.7703 to 1.7726 inch).