PLATE AS. 3131592 - Caterpillar

Illustration 16 g01893763
Lower conveyor assembly (21) onto Tooling (B). Remove Tooling (C) .
Illustration 17 g01893764
Use two people to install side plates (23) and the bolts to conveyor assembly (21). The weight of side plates (23) is approximately 32 kg (70 lb).
Illustration 18 g01893762
Raise the forks and place the front of conveyor assembly (21) into position. Install plate assembly (22) and the bolts to both sides of conveyor assembly (21) .
Remove the lift truck and Tooling (B) .
Illustration 19 g01893761
Install plate (19) and the bolts.
Install bolt (18) .
Install hydraulic cylinders (17) and the nuts.
Connect hose assemblies (20) .
Repeat Step 7 through Step 10 on the other side of the machine.
Connect hose assembly (16) .
Remove the pallet.
Illustration 20 g01893760
Raise the conveyor. Place antislab assembly (15) onto a suitable pallet. The weight of antislab assembly (15) is approximately 295 kg (650 lb).
Install antislab assembly (15). Lower the conveyor into position. Install the pin assembly and the bolt to both sides of the antislab assembly.
Illustration 21 g01893759
Install support (11) and the bolts.
Install steering linkage (12) and the pins. Use Tooling (A) to install the retaining rings to both sides of steering linkage (12).
Install chain assemblies (13) .
Illustration 22 g01893758
Attach lifting slings and a suitable lifting device to frame assembly (10). The weight of frame assembly (10) is approximately 500 kg (1100 lb). Install frame assembly (10) and pin (9) .
Install pointer (8) and the bolts.
Illustration 23 g01893754
Install the spacer and nut (6). Tighten nut (6) to a torque of 340 20 N m (250 15 lb ft).
Install rubber flashing (5) and the bolts.
Connect hose assemblies (7) .
Illustration 24 g01893756
Install lock bar (4), the pin, and the cotter pin.
Illustration 25 g01893755
Install pins (3). Use Tooling (A) to install the retaining rings.
Illustration 26 g01893753
Install plate (2) and the bolts.
Illustration 27 g01893693
Attach a lifting sling and a suitable lifting device to hydraulic cylinder (1). The weight of hydraulic cylinder (1) is approximately 25 kg (55 lb). Install hydraulic cylinder (1), the pin, and the cotter pin.
Illustration 28 g01899296
Connect the hydraulic hoses to hydraulic cylinder (1) .End By:
Install the gear motor (first stage). Refer to Disassembly and Assembly, "Gear Motor (First Stage) - Remove and Install".
Install the conveyor (second stage). Refer to Disassembly and Assembly, "Conveyor (Second Stage) - Remove and Install".