PLATE 3157470 - Caterpillar

Removal Procedure
Turn the fuel supply to the OFF position. Turn the power disconnect to the OFF position.
Illustration 1 g02545057
Disconnect harness assemblies (1).
Disconnect hose assembly (4) and remove hose assembly (3).
Remove fuel filter assembly (2).
Illustration 2 g02545076
Remove bolts (5) and tube assembly (6) and (7).
Illustration 3 g02545104
Loosen tube assembly (11). Loosen locknut (10). Remove nut (14) and reposition plate (9).
Remove nut (16) and bracket assembly (8).
Remove bolts (12), stud (13), stud (17), fuel transfer pump (15), and the O-ring seals. Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Install fuel transfer pump (15) in the reverse order of removal.
Torque bolts (12), stud (13), and stud (17) to a torque of 30 4 N m (22 3 lb ft).