PLATE 3215907 - Caterpillar

Illustration 1 g01144876
Side view of the 8R-5535 Window Wiper and Washer (1) Rear window wiper motor (2) Front window wiper motor
Illustration 2 g01144882
(3) Front wiper blade in the parked positionThe tension of the wiper arm in the loaded position ... 7.5 .5 N (1.7 0.1 lb)
Illustration 3 g01144894
View D-D Front wiper motor (4) Torque for the four bolts at the base of the wiper arms ... 14 2 N m (125 18 lb in)
Illustration 4 g01144895
155-5784 Window Wiper Motor Gp Rear wiper motor (5) Torque for the two bolts at the base of the wiper arms ... 20 3 N m (177 26 lb in)Note: By using a wire with the diameter of 0.5 mm, adjust the jets of the nozzle assembly to direct spray onto the glass directly in front of the wiper blade. 185-2154 Window Wiper Motor
Illustration 5 g01144943
185-2154 Window wiper motor
Illustration 6 g01145190
(6) Tighten the nut to the following torque. ... 19 3 N m (168 27 lb in) (7) Tighten the 5 mounting screws to the following torque. ... 6 1 N m (54 9 lb in) (8) Gray wire B+ (9) Orange wire High (10) Black wire Ground (11) Green wire Low (12) Brown wire ParkThe tension of the wiper arm in the loaded position ... 7.5 .5 N (1.7 0.1 lb)Note: By using a wire with the diameter of 0.5 mm, adjust the jets of the nozzle assembly to direct spray onto the glass directly in front of the wiper blade. 155-5784 Window Wiper Motor
Illustration 7 g01144944
155-5784 Window wiper motor
Illustration 8 g01145255
(15) Gray wire B+ (16) Orange wire High (17) Black wire Ground (18) Green wire Low (19) Brown wire Park
Illustration 9 g01144910
(13) Tighten the nut to the following torque. ... 19 3 N m (168 27 lb in) (14) Tighten the 5 mounting screws to the following torque. ... 6 1 N m (54 9 lb in) (20) Wiper blade should be positioned vertical in the park position. ... 90 5° (21) Installation torque for the nuts on the 5 hose connectors ... 5 N m (45 lb in) (22) Torque for the 2 nuts that secure the windshield washing fluid container in place ... 30 7 N m (22 5 lb ft)The tension of the wiper arm in the loaded position ... 7.5 .5 N (1.7 0.1 lb)Note: By using a wire with the diameter of 0.5 mm, adjust the jets of the nozzle assembly to direct spray onto the glass directly in front of the wiper blade.