AVSPARE.COM
parts catalog

PLATE - WEAR 3236454 - Caterpillar



3236454 PLATE - WEAR Caterpillar parts PLATE
Rating:
66
Alternative (cross code) number:
CA3236454
323-6454
3236454
Caterpillar 3236454 PLATE - WEAR

Buy PLATE - WEAR 3236454 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 4 g06289318
Remove bolts (7) and pump drive flange (8).
Illustration 5 g00456168
Remove bolt (9) and the washer that holds drive gear shaft (10) to the torque converter housing.
Remove pump drive gear (11) and drive gear shaft (10).
Remove drive gear shaft (10) from pump drive gear (11).
Illustration 6 g06289336
Use Tooling (A) and a suitable lifting device to remove torque converter housing (12). The weight of torque converter housing (12) is approximately 95 kg (209 lb). Remove torque converter housing (12).
Illustration 7 g06289340
Use Tooling (B) to remove bearing (13). Remove bearing (13) from pump drive gear (11).
Illustration 8 g06289315
Remove bolts (14) and the washers. Use two people to remove impeller (15) from rotating housing (16). The weight of impeller (15) is approximately 36 kg (80 lb). Remove impeller (15).
Illustration 9 g06289319
Turn impeller (15) onto the opposite side.
Use Tooling (C) to remove retaining ring (17). Remove retaining ring (17) and stator (18).
Illustration 10 g06289370
Use a suitable press to remove carrier shaft (19) from impeller (15). Remove carrier shaft (19).
Illustration 11 g06289374
Remove bolts (20) and drive gear (21).
Illustration 12 g06289376
Remove bearing (22) from impeller (15).
Illustration 13 g06289379
Use Tooling (C) to remove retaining ring (23). Remove retaining ring (23) and end cover (24) from rotating housing (16).
Illustration 14 g06289384
Remove O-ring seal (25).
Use Tooling (C) to remove retaining ring (26). Remove retaining ring (26) and spacer (27) from rotating housing (16).
Illustration 15 g06289389
Turn rotating housing (16) onto the opposite side. Remove turbine (28).
Illustration 16 g06289394
Remove bolts (29) and the washers. Separate turbine (28) from turbine hub assembly (31).
If necessary, remove locating dowel (30).
Illustration 17 g06289408
Remove bearing (32) and ring (33) from rotating housing (16).
Illustration 18 g06289423
Remove retaining ring (39). Remove plate (38).
Use a suitable soft faced hammer to remove shaft assembly (34) from carrier shaft (19).
Remove outer bearing (37).
Use a suitable press to remove inner race (36) from shaft assembly (34).
Remove seal ring (35) from shaft assembly (34).
Remove seal ring (40) from carrier shaft (19).


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.