AVSPARE.COM
parts catalog

PLATE-WEAR 3237338 - Caterpillar



3237338 PLATE-WEAR Caterpillar parts IT28G PLATE
Rating:
8
Alternative (cross code) number:
CA3237338
323-7338
3237338
Caterpillar 3237338 PLATE-WEAR

Buy PLATE-WEAR 3237338 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER,

Compatible equipment models: 3237338:

INTEGRATED TOOLCARRIER  IT28G   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:

Introduction
The following Special Instruction must be used to package a DPF for a core return.
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
Note: Whenever the filter is replaced the engine ash model must be reset. Refer to the section below for information on how to reset the ash model.Reset the Engine Ash Model
The engine ash model must be reset whenever the filter is cleaned or replaced. Reseting the ash model places the DPF volume back to the "Clean State". The resetting will allow the regeneration of the DPF to function properly.
Connect to Cat® Electronic Technician (Cat® ET).
Illustration 1 g03345441
Connect to "Engine #1 Aftertreatment Controller".
Illustration 2 g03345627
Select "Service" from the top menu and select "Service Procedures".
Illustration 3 g03345631
From the "Service Procedures" menu, select "DPF Ash Service".
Select "Start".
Illustration 4 g03345633
Select "Ash Service Reset" to start the reset procedure.
Illustration 5 g03345638
You must read the warning and select "Agree" in order to continue.
Illustration 6 g03345643
Choose the correct replacement type of DPF in the menu that appears. The types of replacements for the DPF are the following:
"Field Cleaned" A DPF that has been cleaned and reapplied.
"New" A new DPF replacement
"Remanufactured" A remanufactured DPF replacement.
Illustration 7 g03345648
Illustration 8 g03345650
One the reset is completed, a log of the reset is captured and visible as a new row of information in the DPF Ash Service screen. Resetting the engine ash model does not reset the soot level.
Perform a "Manual DPF Regeneration" with Cat® ET to reset the soot level.Packaging Instructions
Note: The replacement DPF will be packaged with a bag and zip-tie that are used to repackage the DPF that has been removed.
Place the DPF being returned in the enclosed bag and seal the bag with the enclosed zip-tie.
Place the enclosed warning label on the outside of the bag.
Place half of the foam insert on the bottom of the original shipping box with the cut out in the insert facing up.
Place the DPF into the box fitting the DPF into the cut out in the insert.
Place the second half of the foam insert on to of the DPF with the cut out in the insert facing down onto the DPF.
Seal the box with packing tape.Note: If the package weighs over 16 kg (35 lb), additional tape or banding might be required.
Label the package for return shipment.

Caterpillar parts catalog:

Caterpillar parts catalog
Loader Buckets (without Hydraulics) 7NW00001-UP (MACHINE)
928G Wheel Loader IT28G Integrated Toolcarrier DBT00001-01676 (MACHINE) POWERED BY 3056E Engine


Parts plate Caterpillar catalog:

1P6356 PLATE
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, ...
8E5707 PLATE-END
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446, 446B, 446...
6Y5631 PLATE-CLUTCH
446, 446B, 508, 517, 910E, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, D4HTSK II, D4HTSK III, IT12B, IT14B, IT14F, IT18F, IT24F, IT28G, RT100
9T2232 PLATE-WAFER
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928F, 928G, 928H, 928HZ, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C, D4H, D4H XL, D4HTS...
9T3860 PLATE
30/30, 428, 5130, 65C, 75C, 75D, 85C, 85D, 918F, 924F, 928G, 928H, 928HZ, 938F, 938G, 938G II, 988F, 988F II, AP-1000, AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455...
8P9770 PLATE
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
1364593 PLATE
446B, 446D, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT28G
1364595 PLATE AS
446B, 446D, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT28G
6E6491 PLATE-FLEX
918F, 924F, 928F, 928G, 928H, 928HZ, 938F, 938G, 938G II, IT18F, IT24F, IT28F, IT28G, IT38F, IT38G, IT38G II
9V4484 PLATE
916, 918F, 924F, 924G, 924GZ, 924H, 924HZ, 926, 926A, 928F, 928G, 928HZ, 930G, 936F, 938F, 938G, 938G II, 938H, G916, G936, IT28G
8E5556 PLATE-CLUTCH
924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT18F, IT24F, IT28G
1704698 PLATE-REACTION
928G, 928H, 928HZ, 930G, 930K, IT28G
3667809 PLATE-GUSSET
924G, 924K, 930G, 930K, 938K, 950K, 962K, 966H, 966K, 966M, 966M XE, 972K, 972M, IT28G
3248054 PLATE
924G, 930G, IT28G
2551140 PLATE
924G, 924GZ, 930G, IT28G
2551192 PLATE
924G, 924GZ, 930G, IT28G
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.