PLATE AS 3271136 - Caterpillar

Illustration 1 g02278473
Left side of a typical Cat 3306B Generator Set (1) Lifting eyes for the engine (2) Lifting label for the generator set (3) Lifting eyes for the generator set (4) Center of balance for the generator setThe lifting label for the genset is displayed on the left side and the right side of the generator set. The Lifting eyes for the generator set are placed on the left side and the right side of the generator set.
Illustration 2 g00103219
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted. Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.To remove the engine ONLY, use the lifting eyes that are on the engine.Lifting eyes are designed and installed for the specific engine arrangement. Alterations to the lifting eyes and/or the engine make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Caterpillar dealer for information regarding fixtures for proper engine lifting.Generator Set Lifting
Do not use the engine lifting eyes to remove the engine and generator together.
Illustration 3 g01186367
Lifting label on the left side and the right side of the generator control box.
Illustration 4 g01034418
Lifting label next to the lifting eyes for the generator setLifting the engine and the generator together requires special equipment and procedures. Consult your Caterpillar dealer for information regarding fixtures for proper lifting of your complete package.A generator set package will not be level if you lift the unit with a single point lifting eye. A counterweight can be added between the package frame rails whenever the application requires frequent relocation of the unit. For complete information about adding the counterweight, consult your Caterpillar dealer.The single point lifting eye is secured from the factory before the enclosure is shipped. The correct orientation of the single point lifting eye will allow you to look through the eye when you stand at the side of the enclosure. The lifting eye may stretch when the package is lifted. causing the locking nuts to loosen. This situation could cause the lifting eye to swivel. Ensure that the lifting eye is correctly oriented on the packaged generator set. Ensure that the lifting eye is tightened to the correct torque before you lift the packaged generator set.Engine Lifting
Lifting the engine with a fuel tank that is mounted to the engine requires special equipment and procedures. Do not lift the