PLATE 3286472 - Caterpillar

Illustration 22. Remove eight bolts (1) that hold center drive shaft (2) in position.3. Using two persons, remove center drive shaft (2). The weight of the center drive shaft is approximately 32 kg (70 lb). The following steps are for the installation of the center drive shaft.4. Be sure the drive shaft yokes are positioned on the same center line with the center drive shaft.5. Using two persons, put the center drive shaft (2) in position.6. Install bolts (1). Tighten the bolts to a torque of 160 15 N m (120 11 lb ft). Refer to Illustration 2 for the correct tightening sequence.7. Separate the steering frame lock link. See the topic "Separate & Connect Steering Frame Lock Link" in this module.