PLATE AS-SCREED 3351817 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B - Loctite C5A Copper Anti-Seize -
Illustration 1 g01436840
Illustration 2 g01436842
Attach a suitable lifting device to final drive and travel motor (4). The weight of final drive and travel motor (4) is approximately 209 kg (460 lb).
Position final drive and travel motor (4).
Before assembly, remove compound, oil and dust from female threads, then apply Tooling (B) to the threads of bolts (5).
Tighten bolts (5) in an alternating sequence to a torque of 90 15 N m (66 11 lb ft). Turn an additional 60 5 degrees. Refer to Service Magazine , M0083843 , "An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators" for more detailed information.
Illustration 3 g01436839
Install fitting (3). Connect hose assemblies (2).
Illustration 4 g01436838
Install cover assembly (1).
Illustration 5 g01432111
Remove Tooling (A). Install the cap onto the hydraulic tank.
Connect the track assembly. Refer to Disassembly and Assembly, "Track - Connect".
Illustration 6 g01436409
Reposition the machine away from the suitable cribbing.