PLATE-INSULATOR 3375720 - Caterpillar

Remove bearing cup (9) and bearing (10) from cage (6), if necessary.
Illustration 6 g00504398
Remove transfer gear (11) from transfer gear case (3).
Illustration 7 g00504399
Bearing cones (12) will be damaged if the bearing cones are removed from transfer gear (11).
Remove bearing cones (12) from transfer gear (11), if necessary.
Illustration 8 g00839162
Remove the bolts and install Tooling (G) in cage (13). Tighten Tooling (G) evenly and remove cage (13) and the shims from transfer gear case (3).
Remove bearing cup (14) from cage (13).
Remove bearing cup (15) from transfer gear case (3).
Illustration 9 g00504401
Remove the bolt and the retainer from pinion gear assembly (16).
Install Tooling (B) and attach a hoist. Remove pinion gear assembly (16) from the bevel gear case. The weight of the pinion gear assembly is approximately 33 kg (73 lb).
Remove the bearing cup for the pinion gear assembly from the bevel gear case.
Illustration 10 g00504402
Put the pinion gear assembly in a press. Remove transfer gear (18) and bearing cone (17) from pinion gear (20).
Use Tooling (C) and a press to remove bearing cone (19) from pinion gear (20).
Illustration 11 g00504403
Bend the locking tab away from spanner nut (22).
Place a pry bar between the bolt heads on the bevel gear. The prybar will prevent rotation of the bevel gear shaft.
Use Tooling (D) and remove spanner nut (22). Remove lockwasher (21) and the tongue washer.
Illustration 12 g00504404
Use nylon straps and a hoist to support the bevel gear and the shaft in order to remove the bearings. The weight of the bevel gear and the shaft (23) is approximately 55 kg (121 lb).
Illustration 13 g00839205
Illustration 14 g00839194
Remove the bolts and install Tooling (G). Tighten Tooling (G) evenly and remove cage (24), bearing cone (26), spacer (27), and bearing cone (26). Remove shims (25) from the bevel gear case.
Remove bearing cup (28), center ring (29), and bearing cup (28) from cage (24).
Illustration 15 g00839210
Remove the bolts and Tooling (G). Tighten Tooling (G) evenly and remove cage (29A) and the bearing from the bevel gear case.
Use a hoist and remove bevel gear and shaft (23) from the bevel gear case.
Illustration 16 g00839425
Install Tooling (H) and remove dowel (30) from cage (29A). Remove race and roller assembly (31).
Illustration 17 g00839428
Use Tooling (E) and remove the retaining ring from bevel gear shaft (23).
Use Tooling (F) and remove bearing race (33) from the bevel gear shaft.
Remove bolts (32) and the nuts. Install Tooling (H) in bevel gear (34). Tighten Tooling (H) evenly and remove the bevel gear from the bevel gear shaft.
Remove the tube assemblies from the bevel gear housing.