3483174 PLATE AS-HINGE Caterpillar parts
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
Rating:
Alternative (cross code) number:
CA3483174
348-3174
3483174
CA3483174
348-3174
3483174
EXCAVATOR,
Compatible equipment models: 3483174:
Number on catalog scheme:
7
For full view, you need register
Information:
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01040290
Use Tooling (E) and a suitable press to install bearing assembly (17) on pump shaft (12).
Install bearing cone (23) on the pump shaft.
Install spacer (22) and bearing cups (21) on the pump shaft.
Install bearing cone (20) on the pump shaft.
Illustration 2 g01035607
The splined end of the pump shaft is marked to indicate either RH threads or LH threads on pump shaft (12). Install bearing locknut (16). Use Tooling (D) on the bearing locknut. Tighten the bearing locknut to a torque of 300 30 N m (221 22 lb ft).Note: The torque wrench must be 90 degrees to Tooling (D).
Install set screws (15) and tighten to a torque of 8 1 N m (70.8 8.9 lb in).
Illustration 3 g01035690Note: Do not damage the wear surfaces of the carbon ring or the ceramic ring. Do not touch the wear surfaces of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal.
Apply Tooling (F) to the outside diameter of ceramic seal (18). Use Tooling (G) and hand pressure to install ceramic seal (18) in bearing housing (3).
Illustration 4 g01035699
Use Tooling (A) and a suitable press to install lip seal (19) in bearing housing (3). Ensure that the lip is toward the outside.Note: Install the lip seal dry. Install the lip seal within 2 minutes of removal from the shipping sleeve.
Illustration 5 g01035809
Lubricate pump shaft (12) with clean engine oil. Install the pump shaft in bearing housing (3). Install retainer (11). Install socket head bolts (10) and tighten to a torque of 12 3 N m (106 27 lb in).
Illustration 6 g01035829Note: Do not damage the wear surfaces of the carbon ring or the ceramic ring. Do not touch the wear surfaces of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal.
Remove spring (14) from ceramic seal (13).
Apply Tooling (F) to the inside diameter of ceramic seal (13). Use hand pressure and the tool that is supplied with the water pump seal group to install the ceramic seal. The face of ceramic seal (13) should make light contact with ceramic seal (18).
Install spring (14).
Lubricate pump shaft (12) on bearing housing (3) with clean engine oil. Position impeller (9) on the pump shaft.
Illustration 7 g01035846
Place bearing housing (3) on impeller (9). Use a suitable press and press pump shaft (12) into the impeller. Install the impeller so the dimension between the impeller
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 322C, 322C FM, 323D L, 323D2 L, 323E L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
324D, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325B, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320 L, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D L...
115, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330...
3483173
PLATE-WEAR
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
3483172
PLATE-WEAR
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
3483169
PLATE
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
3483168
PLATE
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
323D L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325D L, 329D, 329D L, 329D LN, 329E LN
2575497
PLATE AS-BOX
323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN
323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN
3412636
PLATE AS-HINGE
323D L, 324D L, 324D LN, 325D, 329D L, 329D LN
323D L, 324D L, 324D LN, 325D, 329D L, 329D LN
2684283
PLATE-WEAR
323D L, 324D, 324D LN, 325D, 325D L
323D L, 324D, 324D LN, 325D, 325D L
2518694
PLATE AS-BOX
323D L, M322D, M322D MH
323D L, M322D, M322D MH
2518690
PLATE AS-BOX
320D, 320D L, 320D LN, 323D L, 323D LN, M322D, M322D MH
320D, 320D L, 320D LN, 323D L, 323D LN, M322D, M322D MH
2518689
PLATE AS-BOX
323D L, 323D LN, M322D, M322D MH
323D L, 323D LN, M322D, M322D MH
2828758
PLATE-WEAR
323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN
323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN
2684280
PLATE-WEAR
323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN
323D L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 329D LN