3512976 PLATE AS Caterpillar parts
330D, 330D L, 336D, 336D L, 336D2, 336D2 L
Rating:
Alternative (cross code) number:
CA3512976
351-2976
3512976
CA3512976
351-2976
3512976
Weight: 46 pounds 20 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$9.25
25 Apr 2021
0.37[0.17] Pounds
US: Newparts
Genuine OEM Grille Retainer Volvo 3512976
Newparts
Newparts
$15.00
11 Jan 2019
volvo: volvo
Genuine Volvo 3512976, Radiator Grille Retainer Clip Pin (x6)
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 3512976:
Information:
Front of the Machine
Illustration 1 g01146790In order to lift the front of each side of the machine, use suitable tooling that can be secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom on casting (1) which is used to mount the front suspension cylinder. The tooling should be placed near the welded joint between the casting and the front frame crossmember that is under the engine.In order to secure the front suspension cylinder on each side of the machine, use suitable tooling that can be mechanically secured in the raised position (20 ton minimum capacity). Place this tooling under front suspension cylinder (2) in order to prevent the extension of the cylinder.Rear of the Machine
Note: If the machine is equipped with the sound suppression arrangement, the sound suppression cover must be removed from the differential before the tooling that is used for lifting the machine is placed in position.
Illustration 2 g01160631In order to raise the rear of the machine, use suitable tooling that can be mechanically secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom of the differential housing. The tooling should be placed in front of bracket (3) which is used to mount the rear suspension cylinder.Note: Do not attempt to raise the rear of the machine with the lift stands between the two rear suspension cylinders.Frame (Rear)
Illustration 3 g01947249
Typical example of the right side
To raise the rear of the frame, use suitable tooling that can be mechanically secured in the raised position (20 ton minimum capacity). Place this tooling under the flat surface on the bottom of frame support (4) for the hoist.The flat surface on the bottom of the frame support for the hoist is not intended to raise any portion of the machine off the ground.
Illustration 1 g01146790In order to lift the front of each side of the machine, use suitable tooling that can be secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom on casting (1) which is used to mount the front suspension cylinder. The tooling should be placed near the welded joint between the casting and the front frame crossmember that is under the engine.In order to secure the front suspension cylinder on each side of the machine, use suitable tooling that can be mechanically secured in the raised position (20 ton minimum capacity). Place this tooling under front suspension cylinder (2) in order to prevent the extension of the cylinder.Rear of the Machine
Note: If the machine is equipped with the sound suppression arrangement, the sound suppression cover must be removed from the differential before the tooling that is used for lifting the machine is placed in position.
Illustration 2 g01160631In order to raise the rear of the machine, use suitable tooling that can be mechanically secured in the raised position (55 ton minimum capacity). Place this tooling under the flat surface on the bottom of the differential housing. The tooling should be placed in front of bracket (3) which is used to mount the rear suspension cylinder.Note: Do not attempt to raise the rear of the machine with the lift stands between the two rear suspension cylinders.Frame (Rear)
Illustration 3 g01947249
Typical example of the right side
To raise the rear of the frame, use suitable tooling that can be mechanically secured in the raised position (20 ton minimum capacity). Place this tooling under the flat surface on the bottom of frame support (4) for the hoist.The flat surface on the bottom of the frame support for the hoist is not intended to raise any portion of the machine off the ground.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 568 FM LL, M330D, W345C MH
324D, 325C, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325, 325 L, 325B, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325D, 32...
320 L, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D FM, 324D FM LL, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D L...
115, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330...
324D L, 325D L, 328D LCR, 329D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LN, 340D L, 340D2 L, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, ...
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
325, 325 L, 325 LN, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 3...
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
2488984
PLATE AS
330D, 330D L, 336D L
330D, 330D L, 336D L
3571952
PLATE
330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
3599395
PLATE
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
3080209
PLATE-COVER
HM315
HM315
3080207
PLATE AS-COVER
HM315, HM415B
HM315, HM415B
2779176
PLATE-LOCK
CTV20
CTV20
2552867
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2459339
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2459338
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2459336
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2302919
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2459328
PLATE AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L