PLATE 3524802 - Caterpillar

Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 3
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 4
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FILM ON THE PIPE CONNECTED TO THE BOOM LOWERING CHECK VALVE (BLCV).
MODELS INVOLVED - 365B, 365B Series II, 365C, 385B, and 385C Excavators
Dear Caterpillar Product Owner:
A Warning Film needs to be installed on the products listed below. The 153-5140 Seat within the boom lowering check valve may fail if the pressure from the bleed-off valve is not released properly before disconnecting the tube connected to the boom lowering check valve. This may result in personal injury or death. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 06Nov2007 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction.
Caterpillar Inc.
Identification #(s)
Attached to 06Nov2007 Service Letter
Rework Procedure
1)For 365B and 365B Series II machines, refer to Image 1.1.1 for the
installation location of the warning film.
Image1.1.1
2)For 365C machines, refer to Image 1.2.1 for the installation
location of the warning film.
Image1.2.1
3)For 385B machines, refer to Image 1.3.1 for the installation
location of the warning film.
Image1.3.1
4)For 385C machines, refer to Image 1.4.1 for the installation
location of the warning film.
Image1.4.1