3530543 PLATE Caterpillar parts
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
Rating:
Alternative (cross code) number:
CA3530543
353-0543
3530543
CA3530543
353-0543
3530543
Weight: 0.66 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 3530543:
Number on catalog scheme:
27
For full view, you need register
Information:
Pump Drive Gear Box
Change Oil
Do not overfill the gear box. If the gear box contains an excessive amount of oil, the oil will overheat during operation. Remove the plug from the remote drain and drain the oil. Clean and install the drain plug. Follow the hydraulic oil viscosity recommendations for the expected ambient temperature range. These recommendations are found in the Operation and Maintenance Manual for the standard 140G motor grader. Incorrect choice of oil can result in All Wheel Drive component failure. Factory fill oil is SAE 30W whose operating range is -20°C (-4°F) to + 40°C (+104°F). Remove the level plug from the front of the gear box. Fill the gear box with SAE 30W oil, (using mating coupling 1P2376) through the fill coupling on the remote location on the right side of the machine.Maintain the oil level to the bottom of the level plug opening. Install the level plug and the coupling cap.Hydraulic Filter (All Wheel Drive Charge System)
Change Filter
1. Use a strap wrench to remove the filter element. Discard the used element.2. Clean the filter base with a clean soft cloth. Be sure all of the old seal is removed.3. Coat the seal with a thin film of clean engine oil. Install the filter element until the seal contacts the filter base. Tighten the filter element an additional 1/2 to 3/4turn.Start the engine and run it at Low Idle. Check for leaks. Add HYDO, DEO or EO oil to the hydraulic tank if necessary.
Change Oil
Do not overfill the gear box. If the gear box contains an excessive amount of oil, the oil will overheat during operation. Remove the plug from the remote drain and drain the oil. Clean and install the drain plug. Follow the hydraulic oil viscosity recommendations for the expected ambient temperature range. These recommendations are found in the Operation and Maintenance Manual for the standard 140G motor grader. Incorrect choice of oil can result in All Wheel Drive component failure. Factory fill oil is SAE 30W whose operating range is -20°C (-4°F) to + 40°C (+104°F). Remove the level plug from the front of the gear box. Fill the gear box with SAE 30W oil, (using mating coupling 1P2376) through the fill coupling on the remote location on the right side of the machine.Maintain the oil level to the bottom of the level plug opening. Install the level plug and the coupling cap.Hydraulic Filter (All Wheel Drive Charge System)
Change Filter
1. Use a strap wrench to remove the filter element. Discard the used element.2. Clean the filter base with a clean soft cloth. Be sure all of the old seal is removed.3. Coat the seal with a thin film of clean engine oil. Install the filter element until the seal contacts the filter base. Tighten the filter element an additional 1/2 to 3/4turn.Start the engine and run it at Low Idle. Check for leaks. Add HYDO, DEO or EO oil to the hydraulic tank if necessary.
Cat SIS web machinery list:
Parts plate Caterpillar catalog:
311, 311B, 311C, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318D L, 318D2 L, 320 L, 320N, OEMS
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307, 307B, 307D, 307E, 308E, 311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C, 315, 315B, 315B FM L, 315C, 317, 318B, 318C, 319C, 320 L, 320B, 3...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D LCR, 314E CR, 314E LCR, 315, 316E L, 320D...
311, 311B, 311C, 312, 312B, 312B L, 312C L, 313B, 314C
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318B, 318C, 318D...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 32...
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D ...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
1799618
PLATE-SLIDE
311C, 311D LRR, 311F LRR, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 318C, 319C, 320C, 320D FM RR, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323...
311C, 311D LRR, 311F LRR, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 318C, 319C, 320C, 320D FM RR, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323...
0941881
PLATE-SLIDE
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D L, 31...
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D L, 31...
1697905
PLATE
311B, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311B, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C
1372854
PLATE AS
311B, 311C, 311D LRR, 311F LRR, 312B, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311B, 311C, 311D LRR, 311F LRR, 312B, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
1372853
PLATE AS
311B, 311C, 311D LRR, 311F LRR, 312B, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311B, 311C, 311D LRR, 311F LRR, 312B, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
1876912
PLATE
312C, 312C L
312C, 312C L
1849391
PLATE
312C L
312C L
1980535
PLATE AS
312C L, 314C
312C L, 314C
1980533
PLATE AS
312C L, 314C
312C L, 314C
1980531
PLATE AS
312C L
312C L
1936565
PLATE
311C, 312C L, 314C
311C, 312C L, 314C