PLATE-CLUTCH 3534968 - Caterpillar

speed lever calibrations involve submodes c03, submode c04 and submode c05.Note: When any clalibration for the speed lever is needed, perform all three calibrations.
Turn the key start switch to the ON position. Do not start the engine.
Enter calibration mode 2 on the ECM display. To do so, press and hold the ECM Mode switch until “- 2 -” is showing in the display area. Submode c01 should be displayed which will confirm that the calibration mode has been entered.
Enter submode c03 (speed lever forward). In order to do so, press and hold the display mode switch in the increment position until “c03” is