3552669 PLATE & FILM GP-CERTIFICATION Caterpillar parts
CP-74B, CS-76B, CS-78B
Rating:
Alternative (cross code) number:
CA3552669
355-2669
3552669
CA3552669
355-2669
3552669
VIBRATORY COMPACTOR,
Number on catalog scheme:
For full view, you need register
Information:
Service Brake Check
Before you perform the test, ensure that you can test the service brakes on a surface which is level, dry, and clear of obstacles. Fasten your seat belt. Ensure that the transmission control is in the NEUTRAL position and that the parking and secondary brake control is in the ENGAGED position.Start the engine and run the engine for one minute in order to fully charge the braking system.
Press hard on the pedal for the service brake control and hold.
Move the lever for the transmission control to the DRIVE position.
Move the parking and secondary control to the DISENGAGE position.
Slowly Increase the engine speed to 1550 rpm. The machine should not move.
If the machine moves, inspect the brake system for wear or damage. Refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting".
Decrease engine rpm to low idle.
Move the parking and secondary control to the ENGAGE position.
Release the pressure which has been applied to the pedal for the service brake control.
Stop the engine.Parking Brake Check
Park the machine on a slope of no more than 15 percent.
Apply the service brake.
Move the parking and secondary control to the ENGAGE position.
Release the service brake.
Stop the engine.
Allow 5 to 10 seconds to ensure the full release of the front service brake's.
If the machine moves, apply the service brake. Start the machine and drive the machine off the slope. Park the machine on a hard level surface. Securely block the wheels before stopping the engine.
If the parking brake has failed to hold the machine stationary, refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting ".Secondary Brake Check
Before you perform the test, ensure that you can test the secondary brakes on a surface which is level, dry, and clear of obstacles. Fasten your seat belt. Ensure that the transmission control is in the NEUTRAL position and that the parking brake control is in the ENGAGED position.Start the engine and run the engine for one minute in order to fully charge the braking system.Note: The Another Service Brake System Valve (ASBS Valve) will automatically engage the service brakes on the front of the machine when the engine is started.
Move the lever for the transmission control to the DRIVE position.Note: Do not disengage the parking and secondary brake control.
Slowly Increase the engine speed to 1200 rpm. The machine should not move.
If the machine moves, inspect the brake system for wear or damage. Refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting".
Decrease engine rpm to low idle.
Stop the engine.
Before you perform the test, ensure that you can test the service brakes on a surface which is level, dry, and clear of obstacles. Fasten your seat belt. Ensure that the transmission control is in the NEUTRAL position and that the parking and secondary brake control is in the ENGAGED position.Start the engine and run the engine for one minute in order to fully charge the braking system.
Press hard on the pedal for the service brake control and hold.
Move the lever for the transmission control to the DRIVE position.
Move the parking and secondary control to the DISENGAGE position.
Slowly Increase the engine speed to 1550 rpm. The machine should not move.
If the machine moves, inspect the brake system for wear or damage. Refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting".
Decrease engine rpm to low idle.
Move the parking and secondary control to the ENGAGE position.
Release the pressure which has been applied to the pedal for the service brake control.
Stop the engine.Parking Brake Check
Park the machine on a slope of no more than 15 percent.
Apply the service brake.
Move the parking and secondary control to the ENGAGE position.
Release the service brake.
Stop the engine.
Allow 5 to 10 seconds to ensure the full release of the front service brake's.
If the machine moves, apply the service brake. Start the machine and drive the machine off the slope. Park the machine on a hard level surface. Securely block the wheels before stopping the engine.
If the parking brake has failed to hold the machine stationary, refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting ".Secondary Brake Check
Before you perform the test, ensure that you can test the secondary brakes on a surface which is level, dry, and clear of obstacles. Fasten your seat belt. Ensure that the transmission control is in the NEUTRAL position and that the parking brake control is in the ENGAGED position.Start the engine and run the engine for one minute in order to fully charge the braking system.Note: The Another Service Brake System Valve (ASBS Valve) will automatically engage the service brakes on the front of the machine when the engine is started.
Move the lever for the transmission control to the DRIVE position.Note: Do not disengage the parking and secondary brake control.
Slowly Increase the engine speed to 1200 rpm. The machine should not move.
If the machine moves, inspect the brake system for wear or damage. Refer to Systems Operation, Testing and Adjusting, "Brake System Troubleshooting".
Decrease engine rpm to low idle.
Stop the engine.
Caterpillar SIS machinery equipment:
Caterpillar SIS
CS74B CP74B Soil Compactor L7B00001-UP (MACHINE) POWERED BY C4.4 Engine »
355-2669
PLATE & FILM GP-CERTIFICATION
CS78B Vibratory Soil Compactor L8C00001-UP (MACHINE) POWERED BY C4.4 Engine »
355-2669
PLATE & FILM GP-CERTIFICATION
CS76B Vibratory Soil Compactor L9H00001-UP (MACHINE) POWERED BY C4.4 Engine »
355-2669
PLATE & FILM GP-CERTIFICATION
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
9R3203
PLATE
30/30, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 446D, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, 910G, 910K, 914G, 914K, 924G, 92...
30/30, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 446D, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, 910G, 910K, 914G, 914K, 924G, 92...
414E, 416E, 416F, 420E, 420F, 422E, 428E, 430E, 430F, 432E, 434E, 434F, 442E, 444E, 444F, CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-74B, CS-533E, CS-54, CS-54B, CS-563E, CS-56B, CS-583E, CS-6...
1028703
PLATE-COVER
143H, 163H NA, 216B, 216B3, 226B, 226B3, 236, 236B, 236B3, 2384C, 242B, 246C, 247B, 247B3, 2484C, 252B, 252B3, 256C, 2570C, 262C, 262C2, 2670C, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 2864C, 287, ...
143H, 163H NA, 216B, 216B3, 226B, 226B3, 236, 236B, 236B3, 2384C, 242B, 246C, 247B, 247B3, 2484C, 252B, 252B3, 256C, 2570C, 262C, 262C2, 2670C, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 2864C, 287, ...
2323751
PLATE
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315C, 316E L, 318D2 L, 318E L, 320D GC, 320D L, 320D2, ...
120M, 120M 2, 12M, 2384C, 2470C, 2484C, 2570C, 2670C, 3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315C, 316E L, 318D2 L, 318E L, 320D GC, 320D L, 320D2, ...
2777789
PLATE
938H, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, IT38H
938H, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, IT38H
2142319
PLATE
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
3589020
PLATE AS
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B
3594533
PLATE
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B
3612297
PLATE
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
3892615
PLATE AS
CP-74B, CS-76B, CS-78B
CP-74B, CS-76B, CS-78B
3624690
PLATE
CP-74B, CS-74B
CP-74B, CS-74B
3651682
PLATE
CP-74B, CS-74B
CP-74B, CS-74B
3479686
PLATE & FILM GP
CP-68B
CP-68B
3624941
PLATE & FILM GP
CP-54B, CP-68B, CP-74B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
CP-54B, CP-68B, CP-74B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B
3479683
PLATE & FILM GP
CS-56B
CS-56B
3479682
PLATE & FILM GP
CS-56B
CS-56B
3389508
PLATE & FILM GP
AS3301C
AS3301C
3532586
PLATE GP-SCREED
AS3301C
AS3301C
3436158
PLATE & FILM GP
CB-44B, CB-54B
CB-44B, CB-54B
3436035
PLATE & FILM GP
CB-44B, CB-54B
CB-44B, CB-54B
3552667
PLATE & FILM GP-CERTIFICATION
CP-54B, CS-64B
CP-54B, CS-64B
3479681
PLATE & FILM GP
CP-54B
CP-54B
3479680
PLATE & FILM GP
CP-54B
CP-54B
3479691
PLATE & FILM GP
CS-78B
CS-78B