PLATE 3605589 - Caterpillar

The following table is a list of possible diagnostic codes for the Caterpillar Advisor.
Table 3
Diagnostic Codes for the Caterpillar Advisor ECM (MID No. 053)(1)
For troubleshooting, see the procedure with the same CID FMI.
CID / FMI Description
CID 0096 - Fuel Level Sensor
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
FMI 08 Abnormal frequency, pulse width, or period.
CID 0168 - Electrical System
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
CID 0248 - Cat Data Link
FMI 02 Data erratic, intermittent, or incorrect.
FIM 09 Abnormal update.
FMI 12 Bad device or component.
CID 0271 - Action Alarm
FMI 03 Voltage above normal or shorted high.
FMI 05 Voltage below normal or shorted low.
FMI 06 Current above normal or grounded circuit.
CID 0296 - Power Train Electronic Control Module
FMI 02 Data erratic, intermittent or incorrect.
FMI 09 Abnormal update.
FMI 12 Failed component or device.
CID 0590 - Engine Electronic Control Module
FMI 02 Incorrect signal.
FMI 09 Abnormal update.
FMI 12 Failed component or device.
CID 0596 - Implement Electronic Control Module
FMI 02 Incorrect signal.
FMI 09 Abnormal update.
FMI 12 Failed component or device.
CID 0811 - Dash Cluster
FMI 09 Abnormal update.
CID 0820 - Keypad 1
FMI 02 Incorrect signal.
CID 1251 - Alternator R Terminal
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
CID 1426- Action Lamp
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
FMI 05 Current below normal or open circuit.
(1) For the Caterpillar Advisor ECM, the MID is 053. This table pertains only to a diagnostic code with a MID of 053.