PLATE-PRESSURE 3646564 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     154-9731     Thread Lock Compound     1    Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Illustration 1 g01132252
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve (36), spring (37), O-ring seal (38), and plug (39) .
Illustration 2 g01132249
Install O-ring seal (32), ring (33), O-ring seal (34), and plug (35). Tighten plug (35) to a torque of 50 3 N m (37 2 lb ft).
Illustration 3 g01132244
Install O-ring seals (27) and plugs (28). Tighten plugs (28) to a torque of 250 50 N m (184 37 lb ft). Install O-ring seals (29) and (31). Install fitting assemblies (30) .
Illustration 4 g01132237
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve (23), spring (24), O-ring seal (25), and plug (26) .
Install O-ring seals (20) and (21). Install fitting assemblies (22) .
Install O-ring seals (15), (17), and (19) on fitting assembly (16) and connector (18). Install connector (18) and fitting assembly (16) .
Illustration 5 g01132236
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (2) and O-ring seal (4) onto fitting assembly (3). Install fitting assembly (3) into housing (12). Install stem (5), retainer (6), spring (7), retainer (8), and washer (9). Apply Tooling (A) to the threads of bolt (10). Install bolt (10). Tighten bolt (10) to a torque of 55 7 N m (41 5 lb ft). Install O-ring (11), housing (12), washers (13) and bolts (14) .
Repeat Step 7 for the remaining valve assembly.
Install tube assembly (1) .End By: Install the ripper control valve. Refer to Disassembly and Assembly, "Ripper Control Valve - Install".