PLATE 3657834 - Caterpillar

Illustration 1 g03822496
Table 1
Specification for 469-1111 Blade and Mounting Gp    
Item    Qty    Part    Specification Description    
-     -     -     Before assembly, coat all the bores and sealing lip with 5P-0960 Grease Cartridge.
After assembly, apply 5P-0960 Grease Cartridge to all the joints from fitting.    
1     4     8T-4137 Bolt     Torque to
70 15 N m (52 11 lb ft).    
2     19     8T-4139 Bolt     Before assembly, apply blue Loctite 243 to the threads.
Torque to
120 20 N m (89 15 lb ft).    
3     2     218-4681 Pin As     Diameter is
34.936 to 34.975 mm (1.3754 to 1.3770 inch).    
4     2     260-6316 Pin As     Diameter is
49.936 to 49.975 mm (1.9660 to 1.9675 inch).    
Illustration 2 g03822497
Table 2
Item    Qty    Part    Specification Description    
-     -     -     Boss surface must be free of paint.    
5     2     265-8713 Bushing     Before assembly, bore surfaces must be free of paint and grease of the bushings.
After assembly, coat bores and bushings with 5P-0960 Grease Cartridge.    
Bore before assembly is
35.191 0.015 mm (1.3855 0.0006 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).
6     4     140-3734 Dust Seal     Apply 5P-0960 Grease Cartridge to the lip of the dust seals lightly with the lubricant that is being sealed. Dust seals must be assembled such that lip is located to the out side of the boss and directed as shown.    
Installation depth is
1.0 0.5 mm (0.04 0.02 inch).