PLATE AS 3670055 - Caterpillar

Illustration 1 g01364017
Illustration 2 g01364020
Install O-ring seals (33), O-ring seal (32), cover (31), bolts (30), and stop assembly (29) into steering control valve (3).
Illustration 3 g01364014
Illustration 4 g01364016
Install valve (28) and springs (27) into steering control valve (3).
Illustration 5 g01364012
Illustration 6 g01364013
Install shims (21), washer (22), retainer (23), spring (24), spacer (25), retainer (26), and bolt (20) onto spool assembly (19).
Illustration 7 g01364010
Install spool assembly (19) into steering control valve (3).
Illustration 8 g01364009
Install O-ring seals (18) into cover (11).
Illustration 9 g01364008
Install valve (15), spring (16), O-ring seal (17), and retainer assembly (12).
Install O-ring seal (14) and retainer assembly (13) into cover (11).
Illustration 10 g01364007
Install cover (11) and bolts (10) onto steering control valve (3).
Illustration 11 g01364006
Install backup rings (8) and O-ring seals (9) onto shuttle valve (7).
Illustration 12 g01364004
Install shuttle valve (7) into manifold (1).
Illustration 13 g01364003
Install backup rings (6) and O-ring seals (5) onto relief valve (4).
Illustration 14 g01364002
Install relief valve (4) into manifold (1).
Illustration 15 g01364001
Attach Tooling (A) and a suitable lifting device to manifold (1).
Install manifold (1) and bolts (2) onto steering control valve (3). The weight of manifold is approximately 39 kg (85 lb). End By:
Install the steering control valve. Refer to Disassembly and Assembly, "Steering Control Valve - Install".