3694346 PLATE-INFORMATION Caterpillar parts
320E, 320E RR
Rating:
Alternative (cross code) number:
CA3694346
369-4346
3694346
CA3694346
369-4346
3694346
EXCAVATOR,
For full view, you need register
Information:
Start By:a. remove engine, transmission and transfer gearsb. separation of engine from transmission1. Remove the transmission control valve from the body of the transmission. Install tool (B) on the transmission control valve porting. 2. Remove the large O-ring seal (1) from the torque converter housing. 3. Fasten tooling (A) and a hoist to the torque converter housing.4. Remove bolts (3) that holds housings (2) and (4) together. 5. Lift torque converter (5) and housing (2) off of housing (4). 6. Put housing (2) in position on the floor with the torque converter side down.7. Remove six bolts (6) that hold the torque converter. Lift housing (2) with a hoist off of the torque converter. 8. Put the torque converter in position on a bench. Remove retainer ring (7) and cap (8). 9. Turn the torque converter over and remove twelve bolts (9). 10. Install two bolts (9) into threaded holes and use them as forcing screws to separate converter impeller (11) from rotating housing (12). Remove converter impeller (11). 11. Turn converter impeller (11) over. Remove six bolts (13) and plates (14) under the bolts.12. Use two pry bars equally spaced and pry wheel (15) up and remove.13. After removing wheel (15), remove two pins (16). 14. Remove retainer ring (17). Put the converter assembly in a press and press carrier (18) out. 15. Turn the converter impeller over and remove six bolts (19), gear (20) and bearing (21). 16. Remove seal ring (22) from the carrier if necessary. 17. Remove retainer ring (23). Press hub (24) from turbine (25) and rotating housing (12).18. Remove turbine (25) from rotating housing (12). 19. Reeove retaining ring (26) from bearing (28).20. Remove retaining ring (27) and then remove bearing (28) from hub (24). The following steps are for the assembly of the torque converter. 21. Heat bearing (28) to maximum temperature of 275°F (135°C) and install it on hub (24).22. Install retaining ring (27) and retaining ring (26).23. Put rotating housing (12) in position on a press. Press hub (24) gently into the rotating housing until movement is stopped by retaining ring (26). 24. Put turbine (25) in position in the rotating housing.25. Put rotating housing and turbine in position in a press. Slowly and gently press turbine (25) onto hub (24). 26. Install retaining ring (23) on the hub (24). 27. Lower the temperature of bearing (21) and install it in the converter impeller.28. Install gear (20) and bolts (19) on the converter impeller. Tighten the bolts to a torque of 30 7 N m (22 5 lb ft).29. If seal ring (22) was removed and inspected for damage, replace it with a new one. 30. Put the converter impeller and carrier (18) in position in a press and press carrier (18) into the converter impeller as shown. 31. Put retaining ring (17) in position to hold the carrier (18) in position. 32. Install wheel (15) and install pins (16). Install plates (14) and bolts (13). 33.
Parts plate Caterpillar catalog:
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D LCR, 314E CR, 314E LCR, 315, 316E L, 320D...
115, 312, 315, 315C, 317, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C...
315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM ...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 32...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
311C, 313D2 LGP, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 3...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 3...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L...
3090564
PLATE
320E, 320E RR
320E, 320E RR
3598656
PLATE AS
320E, 320E RR
320E, 320E RR
3598666
PLATE
320E, 320E RR
320E, 320E RR
3598658
PLATE
320E, 320E RR
320E, 320E RR
3598113
PLATE AS
323E L
323E L
3598111
PLATE AS
323E L
323E L
3687697
PLATE AS
320D GC, 320D L, 323D L
320D GC, 320D L, 323D L
4395666
PLATE-IDENTIFICATION
320E RR
320E RR
4395665
PLATE-IDENTIFICATION
320E RR
320E RR
3694335
PLATE-INFORMATION
320E, 320E RR
320E, 320E RR
3694347
PLATE-INFORMATION
320E, 320E RR
320E, 320E RR