AVSPARE.COM
parts catalog

PLATE AS-MACH 3728213 - Caterpillar



3728213 PLATE AS-MACH Caterpillar parts PLATE
Rating:
21
Alternative (cross code) number:
CA3728213
372-8213
3728213
Caterpillar 3728213 PLATE AS-MACH

Buy PLATE AS-MACH 3728213 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6895 Valve Guide Driver 1
(1) Part of 9U-7530 Engine Tool GroupStart By:
Remove the inlet and exhaust valves.
Illustration 1 g01073841
Remove valve stem seal (1) from valve guide (2).
Use Tooling (A) and a hammer to remove the valve guide from the cylinder head. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6895 Valve Guide Driver 1
B(1) 9U-6894 Guide Collar 1
(1) Part of 9U-7530 Engine Tool Group
Illustration 2 g01073842
Lubricate the bores for the valve guides with clean engine oil.
Install valve guide (2) in the cylinder head with Tooling (A) and Tooling (B). Note: Tooling (B) must be used in order to install the valve guide to the correct height.Height to top of valve guide from cylinder head surface ... 35.00 0.50 mm (1.378 0.020 inch)Note: For more information, refer to Specifications, "Cylinder Head Valves".
Install valve stem seal (1) on the valve guide. End By:
Install the inlet and exhaust valves.


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.