PLATE AS 3820756 - Caterpillar

Identification of connecting rod bolts. The No. 1 and No. 2 connecting rod bolts are on the same side of the connecting rod as the raised bosses and the connecting rod bearing tab slots.1. Lubricate the bolt threads, shank, and seating faces of the cap and nut with 6V-4876 Lubricant.2. Tighten nuts No. 1 and No. 2 to a torque of 300 30 N m (220 22 lb ft).3. Tighten nuts No. 3 and No. 4 to a torque of 300 30 N m (220 22 lb ft).4. Tighten nuts No. 1 and No. 2 again to a torque of 300 30 N m (220 22 lb ft).5. Tighten nuts No. 3 and No. 4 again to a torque of 300 30 N m (220 22 lb ft).6. Tighten each nut an additional 180 5 degrees.Make a note of the new connecting rod bolt tightening procedure in all 3600 Family of Engines Specification modules and Disassembly & Assembly modules.