3836704 PLATE GP-SCREED Caterpillar parts
AP-600D, AP-655D, AS4252C
Rating:
Alternative (cross code) number:
CA3836704
383-6704
3836704
CA3836704
383-6704
3836704
ASPHALT PAVER, ASPHALT SCREED,
Compatible equipment models: 3836704:
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove " for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03010798
Support crankshaft (4) on a suitable stand.
Remove Torx screws (1) from crankshaft timing ring (2). Do not reuse the Torx screws.
Carefully remove crankshaft timing ring (2) from crankshaft (4). Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (3) from the crankshaft unless the dowel is damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the teeth of the crankshaft timing ring are clean and free from damage.
Support crankshaft (4) on a suitable stand.
Illustration 2 g03010798
If dowel (3) was removed, install a new dowel to crankshaft (4).
Position crankshaft timing ring (2) onto the crankshaft with the chamfer toward the crankshaft web. Align the hole in crankshaft timing ring with dowel (3) in the crankshaft. Carefully install the crankshaft timing ring to the crankshaft. Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is installed.
Install new Torx screws (1). Tighten the Torx screws to a torque of 10 N m (89 lb in). End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install " for the correct procedure.
Start By:
Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove " for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03010798
Support crankshaft (4) on a suitable stand.
Remove Torx screws (1) from crankshaft timing ring (2). Do not reuse the Torx screws.
Carefully remove crankshaft timing ring (2) from crankshaft (4). Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is removed.Note: Do not remove dowel (3) from the crankshaft unless the dowel is damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the teeth of the crankshaft timing ring are clean and free from damage.
Support crankshaft (4) on a suitable stand.
Illustration 2 g03010798
If dowel (3) was removed, install a new dowel to crankshaft (4).
Position crankshaft timing ring (2) onto the crankshaft with the chamfer toward the crankshaft web. Align the hole in crankshaft timing ring with dowel (3) in the crankshaft. Carefully install the crankshaft timing ring to the crankshaft. Note: Ensure that the seal surface on adaptor (5) is not damaged when the crankshaft timing ring is installed.
Install new Torx screws (1). Tighten the Torx screws to a torque of 10 N m (89 lb in). End By:
Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install " for the correct procedure.
Caterpillar parts catalog:
Parts plate Caterpillar catalog:
120G, 12F, 12G, 130G, 140, 141, 14E, 14G, 153, 16, 163, 16G, 172, 173B, 183, 183B, 184, 191, 193, 30/30, 416, 416B, 426B, 428, 428B, 438B, 446, 46, 508, 515, 517, 518, 525, 525D, 527, 528, 535D, 545D,...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
AP-600D, AP-655C, AP-655D, AP555E, BG500E, BG600D, BG655D
2889407
PLATE AS
AP-600D, AP-655D, AS4251C
AP-600D, AP-655D, AS4251C
2896054
PLATE
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
2920987
PLATE AS
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG1000E, BG1055E, BG500E
2587189
PLATE
AP-600D, AP-655D, AP555E, AS4251C
AP-600D, AP-655D, AP555E, AS4251C
3704148
PLATE AS
AP-600D, AP-655D
AP-600D, AP-655D
3109820
PLATE
AP-600D, AP-655D, AP555E, AS4251C, AS4252C
AP-600D, AP-655D, AP555E, AS4251C, AS4252C
3836703
PLATE GP-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
2575246
PLATE-SCREED
AP-600D, AP-655D, AS4251C
AP-600D, AP-655D, AS4251C
2874757
PLATE AS
AP-600D, AP-655D
AP-600D, AP-655D
3778848
PLATE-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
3836703
PLATE GP-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
3713760
PLATE-WEAR
AP-600D, AP-655D, AP555E, BG500E
AP-600D, AP-655D, AP555E, BG500E
3539552
PLATE
AP-600D, AP-655D
AP-600D, AP-655D
3628210
PLATE GP-SCREED
AP-600D, AP-655D
AP-600D, AP-655D
3539520
PLATE-SCREED
AP-600D, AP-655D, AP555E, BG500E
AP-600D, AP-655D, AP555E, BG500E
3870255
PLATE GP-SCREED
AP-600D, AP-655D, AP555E, BG500E
AP-600D, AP-655D, AP555E, BG500E
3794521
PLATE
AP-600D, AP-655D, AP555E, BG500E
AP-600D, AP-655D, AP555E, BG500E
3870251
PLATE GP-SCREED
AP-600D, AP-655D, AP555E, BG500E
AP-600D, AP-655D, AP555E, BG500E
3778849
PLATE-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
3836705
PLATE GP-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C
3778847
PLATE-SCREED
AP-600D, AP-655D, AS4252C
AP-600D, AP-655D, AS4252C