PLATE-CLUTCH-YM 3880592 - Caterpillar

- This pertains to the status of a diagnostic code. When a diagnostic code is active, the problem is currently present.Alert Indicator - An alert indicator is an indicator on the Caterpillar Monitoring System. When a problem exists, the indicator flashes. The associated pictograph symbol identifies the machine system that is abnormal.+Battery - This pertains to any of the harness wiring which is part of the circuit that connects to the positive battery post.+V - +V is a constant voltage that is supplied to a component. This voltage provides electrical power for the operation of the component. +V is provided by an electronic control module or the battery.Component Identifier (CID) - A CID is a code that is used to identify a particular component. The CID is a four digit code that is shown on the display of the ECM when the ECM is in the service mode or normal mode.Clear - "Clear" is the removal of diagnostic information from the memory of the ECM. Before clearing a diagnostic code, a diagnostic code must be on hold and a diagnostic code must not be present.Clutch Brake (CB) - The term Clutch Brake is used to describe the type of steering.Connector Contact - A connector contact is the component that actually makes the electrical connection between the harness connector and another connector plug. Connector contacts are either pins or sockets.Data Event - A data event is a recognition of the occurrence of abnormal machine operation. When a combination of signals arrive at the ECM, the ECM decides when the machine is operating abnormally. Data events are recorded by the ECM and data events are viewed by using a service tool.Diagnostic - This refers to showing information, monitoring information, or recording information which is abnormal. Diagnostic information is available when the ECM is in service mode.Diagnostic Code - A diagnostic code describes a condition in an electrical system. The code is stored in the ECM for the service technician.Display - The display consists of the readout and the indicators. The readout and the indicators are visible through the window of the ECM.Differential Steering (DS) - Differential Steering is a type of steering.EB - EB is an acronym for the Electronic Brake.ECB - ECB is an acronym for Electronic Clutch Brake.ECM - The ECM is an acronym for the Electronic Control Module.ECPC - The ECPC is an acronym for the Electronic Clutch Pressure Control.ELRT - ELRT is an acronym for the Electric Long Range Transmission.Event - Whenever the ECM records information, the information is called an event. The ECM classifies the events into either a diagnostic code event or a data event.Floating - Floating is the status (state) of an input to the ECM that is not connected to a positive source or ground.FMI (Failure Mode Identifier) - The FMI is a diagnostic code that identifies the type of diagnostic code that has occurred. The FMI consists of a decimal point (".") and two digits. This code is shown on the