PLATE BACK 3C8130 - Caterpillar

Illustration 1 g01707334
Top view
(1) Solenoid Valve (Transmission Upshift/Downshift) Tighten valve to ... 50 5 N m (37 4 lb ft)Tighten solenoid nut to ... 9 0.5 N m (6.6 0.4 lb ft)Note: For more information, refer to Specifications, "Solenoid Valve (Transmission Upshift/Downshift)". (2) Torque for four bolts that are marked "X" ... 48 4 N m (35 3 lb ft) (3) Torque for bolt ... 48 4 N m (35 3 lb ft) (4) Transmission Lubrication Relief Valve Tighten to ... 85 10 N m (63 7 lb ft)Note: For more information on the transmission lubrication relief valve, refer to Specifications, "Selector and Pressure Control Valve (Transmission)". (5) Torque for five bolts ... 30 4 N m (22 3 lb ft) (6) Valve Group Use the following control valves for 314-9942 Transmission Hydraulic Control Groups.
314-9940 Transmission Hydraulic Control Valve Gp: Seven-speed with stall feature, effective on FRT00001-00845
367-2233 Transmission Hydraulic Control Valve Gp: Seven-speed with stall feature, effective on FRT00846-UPUse the following control valves for 258-8741 Transmission Hydraulic Control Groups.
261-3372 Transmission Control Valve Gp: Eight-speed without stall feature, effective on FRT00001-00845
367-2223 Transmission Hydraulic Control Valve Gp: Eight-speed without stall feature, effective on FRT00846-UPNote: All transmission control valves, 314-9930, 261-3383, and 261-3378 should be modified per Service Magazine, SEPD1360, "Hydraulic Control Modifications for TH48-E80 Petroleum Transmission and SPF343C Pumper Transmission {3074, 3083, 3167}".
Table 1
TH48-E80 ICM Valve History
Control Group 8 Speed No Warm up Feature 7 Speed with Warm-up Feature
258-8741 314-9942
Valve Group 261-3372 367-2223 314-9940 367-2233
Serial Numbers 1-845 846-Up 1-845 846-Up
Pressure Control Valve 261-3378 367-2179 261-3378 367-2179
Selector Valve 261-3383 375-5500 314-9930 375-5499
Manifold 261-3377 261-3377 261-3377 261-3377 Note: The valve group for serial numbers 1-845 will be identical to the valve group for serial numbers 846 and up after updating per service magazine SEPD1360.Note: The valve group was updated to reduce clutch power and energy during the shift and increase shift speed to reduce transmission output speed drop during shifting.All of the valves in this group must be tested as a unit. All of the valves in this group must be assembled into the transmission as a unit. Individual parts of this unit may not be interchanged at any time after the unit has been tested. During repair service, individual parts of this group will be furnished.
Illustration 2 g01707335
View A-A
Do not use any caustic (corrosive) materials in order to clean any parts of this group. Caustic materials will cause corrosion and damage to the parts.
(7) Refer to Specifications, "Pressure Control Valve (Transmission)". (8) Torque for two bolts ... 48 4 N m (35 3 lb ft) (9) Torque for two bolts ... 48 4 N m (35 3 lb ft) (10) Transmission gear switch (11) Lubricate the sealing lip with a small amount of the lubricant that is being sealed. Before you install the