3C8546 PLATE GUIDE Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8546
3C-8546
3C8546
CA3C8546
3C-8546
3C8546
Weight: 0.37 pounds 0 kg.
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
B 1P-1864 Retaining Ring Pliers As 1
C 1P-2320 Combination Puller 1
D 1P-0510 Driver Gp 1
E 1P-1863 Retaining Ring Pliers 1
F 8H-0663 Bearing Puller Gp 1
G 1P-0074 Slide Hammer Puller Gp 1 Start By:
Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove".
Illustration 1 g01195987
Use Tooling (A) in order to reposition retaining ring (3) onto gear assembly (1). Remove gear assembly (1) from plate assembly (2). Remove retaining ring (3).
Illustration 2 g01195993
Use Tooling (B) in order to reposition retaining ring (5) on gear assembly (1). Use Tooling (C) and Tooling (D) in order to remove race (4) from gear assembly (1). Remove retaining ring (5).
Illustration 3 g01196000
Use Tooling (D) and a suitable press in order to remove gear (1) from shaft (6).
Illustration 4 g01196005
Use Tooling (E) in order to remove retaining ring (7). Use Tooling (D) and Tooling (F) in order to remove bearing assembly (8) from shaft (6).
Illustration 5 g01196010
Use Tooling (G) in order to remove bearing assembly (9).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
B 1P-1864 Retaining Ring Pliers As 1
C 1P-2320 Combination Puller 1
D 1P-0510 Driver Gp 1
E 1P-1863 Retaining Ring Pliers 1
F 8H-0663 Bearing Puller Gp 1
G 1P-0074 Slide Hammer Puller Gp 1 Start By:
Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove".
Illustration 1 g01195987
Use Tooling (A) in order to reposition retaining ring (3) onto gear assembly (1). Remove gear assembly (1) from plate assembly (2). Remove retaining ring (3).
Illustration 2 g01195993
Use Tooling (B) in order to reposition retaining ring (5) on gear assembly (1). Use Tooling (C) and Tooling (D) in order to remove race (4) from gear assembly (1). Remove retaining ring (5).
Illustration 3 g01196000
Use Tooling (D) and a suitable press in order to remove gear (1) from shaft (6).
Illustration 4 g01196005
Use Tooling (E) in order to remove retaining ring (7). Use Tooling (D) and Tooling (F) in order to remove bearing assembly (8) from shaft (6).
Illustration 5 g01196010
Use Tooling (G) in order to remove bearing assembly (9).