PLATE 3E1522 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(M10 x 1.50 x 60 mm) 2
B - Guide Stud
(M8 x 1.25 x 90 mm) 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01442381
Remove the hose from adapter (6). Remove bolts (7) and adapter (6) from cover (1).
Remove bolts (8) and tube assembly (9) from cover (1).
Remove bolts (4) and adapter (5) from the base assembly.
Attach a suitable lifting device to core assembly (3) at Location (X). The weight of core assembly (3) is approximately 35 kg (77 lb).
Remove two bolts (2). Install Tooling (A) into the base assembly.
Remove remaining bolts (2).
Remove cover (1). Remove the gasket from cover (1).
Remove core assembly (3).
Remove Tooling (A) from the base assembly. Remove the gasket from the base assembly.
Illustration 2 g01442382
Disconnect the harness assembly from sensor assembly (10).
Remove two bolts (11). Install Tooling (B) into the cylinder head.
Remove remaining bolts (11) and bolts (13).
Remove base assembly (12). The weight of base assembly (12) is approximately 23 kg (50 lb).
Remove Tooling (B) from the cylinder head.